;
DirDirect :: Torches & Lighting :: Primary Torches :: DivePro CL4200B Dive Light - Standard

DivePro CL4200B Dive Light - Standard

DivePro CL4200B Dive Light - Standard
DivePro CL4200 Technical Dive Light DivePro CL4200 Technical Dive Light DivePro CL4200 Technical Dive Light DivePro CL4200 Technical Dive Light

The DivePro CL4200B is a powerful and robust technical dive light with a 6º spotlight and a floodlight around 60º running at up to 4200 lumens, making it an ideal tool for all purpose diving as well as in-water signalling. Made out of durable aircraft-grade aluminium, the CL4200B has a run time of 210 minutes on high power which is extendable to 400 minutes on medium (2000 lumen) power and further on using stepless dimming from 100% to 1%. This is the standard cable version of the CL4200 which also comes in a 90º cable angle version as CL4200S for sidemount diving and alternative configurations.

Details
SKU CL4200B
£545.00

The DivePro CL4200 is a powerful and robust technical dive light with a 6º spotlight and a floodlight around 60º running at up to 4200 lumens, making it an ideal tool for all purpose diving as well as in-water signalling. Made out of durable aircraft-grade  aluminium, the CL4200 has a run time of 210 minutes on high power which is extendable to 400 minutes on medium (2000 lumen) power and further on using stepless dimming from 100% to 1%. This is the standard cable version of the CL4200 which also comes in a 90º cable angle version as CL4200S for sidemount diving and alternative configurations.

 

Package contents:

 

The DivePro CL4200 comes in a classy purpose built hard box with protective foam slots made for safe transport yet classed as packaging and disposable (the box is therefore not subject to any warrant). Inside the box is the battery canister, torch head and cable, battery protector cap, charger, plug adapters for various countries and any tools a diver may need to make adjustments. Included are an aluminium adjustable goodman handle that easily screws into the torch head with its supplied screw and a soft goodman handle for those who want the extra comfort.  

Light head and adjustments:

The DivePro CL8 light head isn't the smallest on the market but is extremely powerful. It's made out of aircraft-grade aluminium and has an aluminium alloy reflector condenser system with a single CREE XHP70.2 LED and variable power modes. The beam itself is sufficient for long-distance underwater signalling even in adverse conditions with a strong inner 6º spotlight beam at the centre and an approximate 60º floodlight aura around it.
 

DivePro CL4200 dive light


The light head weighs slightly over 400 gr on the surface ,measuring just over 10cm in length with a cone structure from the cable end of 4.5cm to 7cm at reflector.

The torch is operated via a 316 stainless steel push button on the head itself which is surrounded by a colour coded battery indicator that cycles from blue to green and then red displaying 70-100%, 30-70% and less than 30% charge respectively. This allows the battery canister to be attached or carried anywhere and even out of the reach of the diver as its user-friendly on-off button is conveniently on the head itself.

Divepro Technical Diving Torch CL4200

Settings on the torch head are easy to use. At the push of a button divers can choose between full power at 4200 lumen, medium power at 2000 lumen (which itself is plenty with about 6 hours of run time) and of course on and off. There is also an emergency SOS mode where the torch flashes.

Divepro cl4200 technical dive light

If a touch more complicated to use until one gets used to it, the torch also an AI stepless dimming with memory function allowing adjustments to made from 100% to 1% - 4200 lumen to 42 lumen (which could come handy in conditions where the full brightness of the torch may have impact on visibility.

Divepro CL4200 dive light

Canister & charging:

The exceptionally small battery canister of the Divepro is about 17cm tall with a diameter of 5.5 cm and weighs only 700 gram on the surface. A couple of jubilee clips supplied by manufacturer can be used to make a webbing loop to mount the canister on the waist webbing of a harness system and the cable at around 149cm from end to end including strain reliefs allows for varuous kinds of routing from backmount to sidemount and CCR mount. Indeed if you wanted to, the small canister can easily be put in a BC or dry suit pocket too.

Charging the unit is a breeze with the light head cap of the battery canister unscrewed to expose a double o-ring seal around the threads and a single charge port leading to the battery. A battery protective cover with a charge hole in the middle is supplied by manufacturer to attach the standard charge plug to the battery pack which consists of 8 18650 14.4V 6800mAh rechargeable batteries.

Though manufacturer specs put the total charge time at 3 hours we’d advise remembering real charge times  depend on how discharged a battery is and LiOn batteries do like to be charged slowly.

Divepro Technical dive torch

 

Specs at a glance:

 

Products Name
DIVEPRO CL4200B
  LED
CREE XHP70.2
Color temperature
Warm White 5000K / Cold White 6500K
Lumen/ Runtime
High 4200lm / 210mins

Mid  2000lm/  400mins

Stepless Dimming from 100% to 1%

Body material
Durable Aircraft-grade Aluminum
Reflector
Aluminum Alloy Reflector Condenser System
Beam Angle
Spotlight about 6 °; Floodlight about 60 °
Lens
4mm PC lens
Battery
14.4V, 6800mah. 18650 power battery pack
Flash model
Short Press to switch High–Mid. Double Press enters Stepless adjustment with memory function; Triple Press to switch Quick Flash– SOS
Surface finish
Premium Type III Hard Anodizing
On-Off 
316 Push Button Switch
Waterproof
IPX8, 100M underwater
Weight
About 1000grams( on the land ); about 400grams(on the water )
Color
Black
Packing List
Canister Light + Charger + Glove + Case, Goodman Handle
Used for
Scuba Diving, Side Mount Diving, Tech Diving

* Warranty and aftercare:

Divepro torches are distributed in the United Kingdom by one of our main suppliers, Nautilus Diving, who are also the main distributor of products from other leading manufacturers including XDeep, Analox, Ammonite lights and SUEX scooters.  Divepro lights are covered against manufacturing defects and faults as like any other product sold in the UK and batteries have a 6 month warranty against any manufacturing issues.

 

 

: *
: *
: *
Type the characters you see in the picture:

test

*
Gift certificates

 
We use cookies to give you a better experience and understand how the site is used. By continuing to use this site, you consent to this policy. You can change your preferences any time. Click to learn more.