- per page
Low profile, delrin, high flow rate... Go with your flow and dive in comfort with the P-Valve from Apeks. Never again let your pre-dive hydration be a concern during your dry suit dive. With one of the fastest flow rates of any pee valve on the market, you can relax and enjoy the call of the wild while the Apeks P-Valve answers your call of nature.
The Apeks HP Twin Adaptor the use of a SPG and a transmitter on a first stage that only has a single high pressure port. It also has the added benefit of allowing a transmitter to rotate 360 degrees, which prevents it being damaged if a cylinder were to fall over.
OUT OF STOCK UNTIL DECEMBER
The new Apeks VX1 is the ultimate in diving mask comfort. Lightweight, frameless, with Pure Clear lens for maximum optical clarity and a premium silicone skirt for exceptional comfort and fit.
The Apeks MTX-R sidemount regulator set is a super tough, rugged, high performance, go anywhere sidemount regulator configuration designed to meet the rigours of cold water and extreme sidemount diving. The MTX-R is highly reliable and also very easy to service out in the field which make it an ideal choice for the expedition and exploration diver.
100% O2 clean Apeks XL4 Regulator is designed with the cold-water exploration diver in mind. Weighing in at a tiny 905g, the XL4 is the lightest ever cold-water regulator produced by Apeks - greatly reducing the risk of a free flow in low temperatures. Comes complete with hose. First stage with M26 thread.
The Apeks XTX200 Regulator blends style and high performance. Every detail on XTX 200 regulator has been carefully designed to offer a regulator of the highest quality with great performance at any depth. This leading regulator set includes the XTX200 First and Second stages with Apeks Flexi regulator hose.
The Apeks XTX50 regulator set is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price. This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimal hose routing while eliminating sharp bends in the hose. The set includes XTX50 second stage and DST first stage with standard length regulator hose.
The Apeks MTX-R regulator is based on the MTX, a regulator that was developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Innovations in design mean that the MTX-R regulator performs in almost freezing water, something that very few other regulators on the consumer market can boast. With an innovative first stage design that helps to prevent ice build up around the diaphragm, the MTX-R is reliable, rugged and expedition ready.
The Apeks XL4 regulator is a compact and lightweight regulator suitable for diving in all environments, including cold water locations. Its design and low weight help reduce jaw fatigue on long dives. Weighing in at a tiny 905g (DIN version), the XL4 is the lightest ever cold-water regulator produced by Apeks - greatly reducing the risk of a free flow in low temperatures. Set includes First Stage, Primary Second Stage and Apeks Flexi 29" regulator Hose.
The Apeks XL4+ regulator is a compact lightweight regulator suitable for diving in all environments including cold water locations. Its design and low weight help reduce jaw fatigue on long dives. The XL4+ also makes an ideal stage regulator, perfect for the technical exploration diver with a large amount of equipment. The XL4+ regulator is a high-performance option for those technical divers serious about weight savings.
Apeks Left and Right handed valves for sidemount cylinder systems. These valves come with blanking plugs and are ideal to set up two tank independent systems with left and right handed valve control. The valves can later be 'manifolded' for backmount systems to suit changing configuration and diving styles.
The Apeks range of 232bar manifolds feature a metallic reinforced, soft grip and shock resistant hand-wheel, double o-ring sealing and nickel plated internal parts for high gas flow and superior performance.
The Apeks MTX-R Regulator is based on the MTX, a regulator that was developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Innovations in design mean that the MTX-R regulator performs in almost freezing water, something that very few other regulators on the consumer market can boast.
The Apeks XTX40 Regulator comes with all the features of Apeks XTX50 with the exception of diver adjustable breathing resistance control. The set includes XTX40 second stage and DST 1st stage with Apeks Flexi Hose.
The Apeks Hose Retainer is used to retain the long hose when diving in a long hose configuration without the need for a canister light.
The Apeks LifeLine spools feature easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line with a super tough leader and swivel as standard. Available in four sizes - Purple 15 metres, Green 30 metres, Blue 45 metres and Grey 60 metres.
The Apeks stainless steel single tank adapter plate comes with two sets of bolts, pair or washers and wing nuts. Tank bands not included.
The Apeks WTX-D Single Cylinder Wings are narrow in design allowing a cylinder to nest deep inside them. Available in three lift capacity: 18lbs, 30lbs or 40lbs.
Apeks Over Pressure Relief Valve for Drysuit Inflation System.
Apeks 90 Degree Fixed Elbow for regulator second stages. Fits most regulators.
Set of four Apeks Coloured Mouthpieces made from soft silicone. All the edges have been rounded ensuring it’s comfortable to wear even during extended dives. Includes red, yellow, blue and green mouthpiece.
The Apeks 2-gauge console combines a submersible pressure (contents) gauge (SPG) and a depth gauge housed in a specially designed case. The console clearly displays your pressure and depth readings for easy viewing under water and the dials have a long phosphorescent effect for better reading in poor visibility conditions.
The 2+1 instrument combo is an Apeks 2-gauge console with a unique Apeks compass on the reverse. A compact system which makes it a great combo set. The front facing The 2 gauge housing combines a submersible pressure (contents) gauge (SPG) and a depth gauge.
The Apeks Cylinder Pressure Tester comes with push button vent. DIN fitting. A 450bar HP gauge that can be fitted to a cylinder to check the pressure.
Apeks DIN conversion unit to remove A clamp from 1st stage and refit with male 300 bar DIN connector (M25). Available as an O2 clean version or non-O2 clean.
The Apeks DRY100 Bag is made from a 1000D Nylon Core 0.6mm thick Tarpaulin, which is designed to protect your gear from the most extreme environments.
The Apeks Dry Bag provides 113 litres of packing capacity and features a 33” (84cm) wide mouth roll-top to make it easy to stuff your kit in the bag. The bottom is a polymer reinforced foam that reduces impact force and is hard-wearing. Removable backpack straps make those long hikes to beach and cave dives way easier.
The DRY12’s main function is to modularly attach to the Apeks DRY100 & Apeks DRY75.
The four stainless steel karabiners on the Apeks Dry Bag DRY12 latch to the four stainless steel D-rings over the Apeks logo on the side of the DRY100. When attached, the waterproof roll-top opening on the DRY12 is conveniently located and easily accessible.
The Apeks Dry Bag has 75 litres of carrying capacity and sports a removable drycore to keep your wet gear away from your dry gear. The main bag features a drain so you can rinse your equipment on the go and a splash proof top flap so you don’t have to unroll your pack every time you need your passport.
The Apeks Dry Suit Cuff Dump is designed to fit in the suit cuff and allows air to be vented from the suit by simply raising the arm. Totally free from maintenance and requires no adjustment.
The Apeks Drysuit Inflator Valve is designed to rotate 360 degrees for flexibility. Supplied with a Seatec type hose fitting. Rotation is a key feature of this valve to meet the diver's personal hose configuration.
The original Apeks High Profile Drysuit Exhaust Valve
Apeks low profile drysuit dump valve has the lowest profile with optimum dump rate. It has an improved ratchet feel and is ergonomically designed for ease of use.
Complete Apeks MTX-R Twinset Regulator Set. The Apeks MTX-R is based on the MTX, a regulator that was developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Innovations in design mean that the MTX-R regulator performs in almost freezing water, something that very few other regulators on the consumer market can boast. Set includes: 2 x MTX-R 1st stages, 2 x MTX-R 2nd stages, 7' main regulator hose and 24" backup regulator hose.
The Apeks RK3 HD fins are made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The new compound of the RK3 HD adds more weight to make it negatively buoyant.
The Apeks bungee connector system has been designed as a neat storage solution for your backup regulator and can be configured according to a diver's personal preference.
The Apeks Sidemount Regulator set has been developed together with Steve Bogaerts, the world renowned pioneer of side mount diving.
The complete set includes: 2 x Apeks XTX50 Second Stages, 2 x Apeks XTX Dryseal First Stages with 5th port conversions, 2 x Apeks SPGs with hoses, all the hoses and elbow necessary for a complete set, ready to go, out of the box.
The Apeks submersible pressure (contents) gauge (SPG), with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder. The gauge indicates the cylinder bottle pressure and the dial range is from zero to 360 bar.
Apeks’ range of quality, accurate and stylish gauges and gauge consoles includes this compact and unique Pressure Gauge and Compass combination. The Apeks submersible pressure (contents) gauge (SPG), with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder. The gauge indicates the cylinder bottle pressure and the dial range is from zero to 360 bar.
The Apeks Tech Shorts can be worn above a dry suit or a wet suit to create additional pocket space, or can be worn alone for use in warm water or for other aquatic activities. Ideal for warm water diving conditions where the additional storage of slates, spools or torches is required while wearing a wet suit.
Apeks has developed unique first stages specifically for use on a twinset. The Apeks TEK3 Twinset Regulator Set comes with Apeks TEK 3 first stages and Apeks XTX50 second stages including hoses.
The Apeks WTX Tek Large Cargo Pocket can be mounted on any standard 2" webbing harness waistband and provides large storage space for when it's needed. The zipper closure is a single compartment which also has two loops allowing bungee to be looped through. The pocket can be expanded by attaching smaller Apeks Pockets to it by the 4 front grommets and has a bottom grommet that acts as drainage.
The vertical and compact Apeks WTX Tek mesh pocket can be mounted on any standard 2 inch harness (waist) webbing thanks to a loop on the back or attached directly to an Apeks large pocket with 4 rear grommets. With a bellow construction that allows ample volume the pocket is near-flat when empty yet big enough to store a spare mask and spool or DSMB/spool combination all held securely in place with a pinch clip closure on 1” webbing.
The Apeks WTX Tek Small Cargo Pocket can be mounted on any standard 2" webbing harness waistband or fit to the front of the Apeks Large Cargo Pocket. With its large flap with velcro closure on front it is easy to open a close without the hassle of zippers and an excellent size for carrying slates, floats, line markers or even extra weights.
The XL4 Octopus is compact and lightweight, improving comfort and reducing jaw fatigue. Comes complete with yellow flexi octopus hose. The Apeks XL4 regulator is designed with the cold-water exploration diver in mind.
The Apeks XTX Tungsten Regulator has an udated PVD finish and the 5th port has been made as a standard feature. The XTX Tungsten is built on the XTX200 platform but with a truly unique, added feature: it is protected with a hard, durable Physical Vapor Deposition (PVD) finish. This “tough as nails” finish is better than traditional chrome plating. The coating is made of high quality grades of Titanium, Zirconium and Chromium. The result not only looks extremely attractive, but protects your investment from normal diving abuse.
Highly recommended second stage regulator for sidemount diving with one each (long & short) hose/cylinder.
The Apeks XTX50 is a fully diver-adjustable pneumatically balanced second stage with venturi and breathing resistance control. It has a heat exchanger which is suitable both for warm and cold water conditions. Serious sidemount divers may prefer to attach a 90 degree fixed elbow between the LP hose and the second stage on the short hose side.
Apeks waterproof wetnotes with runtime slates, graphite pencil and double ender. Double sided slates attached to the notes (removable) + independent slate to be used in transparent sleeve.
Pack of 5 directional Apeks arrow line markers with reflective stickers. Available in orange or white.
Pack of 5 Apeks cookie line markers with reflective stickers. Available in orange or white.
Pack of 5 non directional Apeks line markers with reflective stickers. Available in orange or white.
The Apeks Chronograph Watch is water resistant to 100 metres and has a stainless steel case with a rotating, one way bezel. Seiko movement ensures it is accurate and great for diving but also looks great worn casually.
Both mens and ladies versions of Apeks Professional Dive Watch has a easy to read luminous face and large uni-directional bezel. Highly reliable Seiko VX42 Quartz movement. Tested to 200 metres.
The Apeks WTX-D twin cylinder wings are designed for twin set diving. Referred to as donuts, the WTX-D wings are oval shaped air cells or bladders. Not only are these donut wings streamlined, but due to their shape being a continuous loop, they are very stable underwater. There is no dramatic shift of air from left to right.
The Apeks MTX-R is based on the MTX, a regulator that was developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Innovations in design mean that the MTX-R 2nd stage regulator performs in almost freezing water, something that very few other regulators on the consumer market can boast.
The Apeks WSX-25 sidemount system is a feature-rich wing and harness system which comes complete with bladder, crotch strap, D-rings, bungee and accessory butt pack for an all-in-one price. Apeks has focused the design of the WTX-25 for the serious cave and wreck diver style of sidemount diving incorporating many valuable features.
The Apeks XL4 regulator is designed with the cold-water exploration diver in mind. The XL4 2nd stage is compact and lightweight, improving comfort and reducing jaw fatigue on long duration dives. The Second Stage boats a high performance pneumatically balanced lever operated poppet valve, a large over moulded self flushing and controllable purge button and an easy to use and locate ergonomic venturi lever.
Nitrox version of popuar Apeks XTX40. Pneumatically balanced second stage with venturi control. Heat exchanger - suitable for both warm and cold waters.
Apeks XTX40 Second Stage Regulator is highly recommended primary or backup regulator. Pneumatically balanced second stage with venturi control. Heat exchanger - suitable for both warm and cold waters.
The Nitrox version Apeks XTX50 Second Stage is fully diver adjustable pneumatically balanced 2nd stage with venturi and breathing resistance control. Heat exchanger - suitable for both warm and cold waters.
Highly Recommended Primary Regulator. The Apeks XTX50 Second Stage is fully diver adjustable pneumatically balanced 2nd stage with venturi and breathing resistance control. Heat exchanger - suitable for both warm and cold waters.
Nitrox version of Apeks XTX200 second stage. The Apeks XTX200 Nitrox Second Stage Regulator is pneumatically balanced suitable for cold water use.
Pneumatically balanced suitable for cold water use. The Apeks XTX200 Second Stage regulator can be converted from a right handed hose configuration to a left handed one.
This Apeks ZTX Octopus is based upon the ATX second stage with proven cold water capability and the performance you would expect from an Apeks pneumatically balanced valve. It features a diver-adjustable venturi control, a high visibility yellow front cover, yellow accent pieces and a 36” yellow hose.
The pneumatically balanced Apeks Egress Octopus provides superior performance for an alternate air source, making it a perfect complement to the high performing Apeks regulators. This innovative, low profile design minimizes drag.
Apeks MTX-R Octopus with yellow flexi hose. Rugged, strong and designed to withstand the knocks and bumps. Comes complete with yellow flexi octopus hose.
The Apeks XTX40 octopus can be converted from a right handed hose configuration (as supplied from the Apeks factory in the standard) to a left handed one.
The XTX 50 octopus from Apeks includes the Reversible Venturi System which allows the user to convert from a right handed hose configuration to a left handed one.
High quality First Stage ideal for stage regulator. The Apeks DS1 First Stage is compact, environmentally sealed with one 3/8 medium pressure port and one high pressure port.
The Apeks DS4 First Stage is a work horse with years of tested and proven experience now preferred by the most demanding technical divers. Ideal for twinset configuration.
Add an additional fifth port to your Apeks DST with the Apeks DST 5th Port Turret Upgrade Kit. The picture shows a hose attached to the new port positioned at the turret end of the Dry Sealed Turret (DST) 1st stage. The Apeks conversion kit is only suitable for the DST 1st stage and cannot be used on other Apeks 1st stages.
The Apeks DST first stage regulator is ideal for stage cylinder regulator due to swivelling turret. Four medium pressure ports mounted on a swivel turret. Two high pressure ports on the body.
This rock-hard and tested Apeks DST first stage regulator is now available with a fifth port conversion kit fitted to upgrade it from 4 to 5 ports. The end-port allows any length dry suit/wing LP hose attachment and direct routing to the kit -- leaving 4 LP ports and 2 HP ports for other hose routing. The DST boasts a swivel turret making it ideal for any kind of side-slung setup from stage bottles to CCR bailout and plain sidemount.
Leading features of the Apeks MTX-R first stage include a world-first over-moulded first-stage end cap to the sealed (environmental) diaphragm helping prevent ice buildup that could cause first stage free flow in extreme circumstances.
Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK 3 Fin, is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. Colour White
Apeks TEK3 first stages are specifically designed for use on a twinset. The system benefits from streamlined hoses with little chance of accidental snagging and also improved ease of access to cylinder valves. The set includes both left and right hand side first stages.
Apeks US1 First Stage regulator is a compact unsealed first stage with 1 x 3/8 medium pressure ports and one high pressure port.
The Apeks US4 first stage regulator is a compact unsealed First Stage with 4 x 3/8 medium pressure ports and 1 x high pressure port. Popularly used with air on optional suit inflation bottles as an alternative suit inflation method.
New from Apeks, the XL4 regulator is designed with the cold-water exploration diver in mind. Weighing in at only 905g (DIN version), the XL4 is the lightest ever cold-water First Stage produced by Apeks - greatly reducing the risk of a free flow in low temperatures due to exclusive design.
Add an additional fifth port to your Apeks XTX200 and XTX100 first stages (FSR and FST type). A 5th port offers the user more versatility in terms of hose routings and port positions depending on the type of diving. This particular version incorporates a heat exchanger which acts as an additional safeguard against freezing.
Environmentally sealed Apeks XTX200 FSR first stage is balanced for superior performance. Also available with fitted 5th port.
Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 fins are rugged thermoplastic rubber fins with an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. Colour: Black.
The Apeks RK3 Fins in pink are a new colour for the popular Apeks fin range. Made out of rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing.
Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks fins, RK3, is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing.
The Apeks RK3 HD fins are made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The new compound of the RK3 HD adds more weight to make it negatively buoyant.
The Apeks RK3 HD fins are made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The new compound of the RK3 HD adds more weight to make it negatively buoyant.
Complete Apeks XL4 Stage Regulator set with 40" (100cm) stage regulator hose. The Apeks XL4 regulator is a compact and lightweight regulator suitable for diving in all environments, including cold water locations. Set includes First Stage, black Primary Second Stage and rubber 40" stage regulator hose.
A long hose regulator setup including 1st and 2nd stages from Apeks, complete with 5 or 7 foot primary regulator and 24" backup regulator hoses.
Mix and match your favourite APEKS REGULATOR SET. Select from Apeks XTX40, XTX50 or XTX200 second stages to Apeks US4, DS4 or DST first stages.
A complete Apeks Twinset Regulator Set with two first stages and second stages including 7 foot primary regulator hose and 24" backup regulator hoses.
Simply create your favourite APEKS REGULATOR PACKAGE from Apeks XTX40, XTX50 or XTX200 second stages to Apeks US4, DS4 or DST first stages.
Apeks XTX40 / DS4 Stage Regulator set includes environmentally sealed Apeks DS4 First Stage and Apeks XTX40 Second Stage with 40" hose.
The Apeks XTX50 / DS4 Stage Regulator set comes complete with environmentally sealed Apeks DS4 first stage and adjustable XTX50 second stage with 40" hose.
The Apeks XTX50 / DST Stage Regulator Set includes environmentally sealed Apeks DST first stage with turret complete, adjustable Apeks XTX50 second stage and 40" stage regulator hose.
This simple, yet strong, Apeks Deluxe One-Piece Webbed Harness can take the load of a fully rigged technical diver. It can be easily customized with the hardware of your choice. (Backplate not included)
The most versatile soft-back harness from Apeks. Solid construction coupled with durable materials making Apeks WTX Harness a cornerstone for many applications.
The 100% O2 clean Apeks XTX200 Regulator takes all that is good from its predecessor and offers even more. Not only has the regulator been brought right up to date with stunning looks but we have also made functional improvements. DIN M26 fitting.
The 100% oxygen clean Apeks XTX40 Regulator includes Apeks XTX40 second stage with Apeks Flexi Hose and Apeks DST first stage with DIN M26 fitting.
- per page
