DIR Starter: Halcyon Infinity Wing + Halo Aura H-50D Long Hose Regulator Package

All of our DIR starter packages are future-proof for twinset diving with the addition of a second 1st stage and a doubles wing.

A fully adjustable cinch-based DIR single tank starter package pairing the Halcyon Infinity single tank wing system with the high-performance Halcyon H-50D, Halo, Aura long hose regulator set and master SPG.

The system comes completely set up with a Halcyon Eclipse wing, backplate with a quick-adjust Cinch harness, single tank adapter, soft shoulder and backplate pads and integrated weight pockets.

Ful package includes

• Halcyon Eclipse Wing (30lbs or 40lbs) with 22" Inflator hose
• Halcyon Ali or SS Backplate fitted with Adjustable Cinch Harness
• Halcyon Single Tank Adapter with SS buckles
• Halcyon Deluxe Shoulder Pads and Backplate Pad
• Halcyon ACB Intergrated Weight Pockets
• Halcyon 50-D first stage (DIN)
• Halcyon Halo second stage primary regulator
  
• 210cm (7') primary regulator hose
  
• Halcyon Aura second stage backup regulator
  
• 24" backup regulator hose
  
• Halcyon Master Pressure Gauge (SPG)
  
• 26" High Pressure hose
  

Halcyon Infinity Single Tank Wing System

The Halcyon Infinity Single Tank Wing System is not your typical buoyancy compensator. It offers an unparalleled performance of a back-mounted harness and the easy adjustability of a jacket BC for single-tank divers.

The Infinity's most distinguished feature is the novel harness known as the Cinch Quick-Adjust Harness, which redefines what it means to dive a backplate, providing unparalleled comfort and stability with infinite adjustability.

The Infinity BC features Halcyon’s immensely popular Eclipse wing - a long, narrow profile which supports a diver’s tank along his or her entire length, preventing unnecessary drag and minimising in-water effort.


• Infinite adjustability in the blink of an eye
• Snug, stable fit with easy removal
• Easily adjustable while in or out of water
• Easily convertible for suits of varying thickness

Halcyon Eclipse Wing

The Halcyon Eclipse Wing is a doughnut-shaped back-mounted Buoyancy Compensator (BC) allowing divers to enjoy perfect horizontal trim underwater and minimising in-water effort.

A circular zipper around the inside of the Eclipse wing allows for easy inspection and replacement of the interior bladder if required. A drainage system in the bottom of the wing allows water to drain rapidly from the outer cover to minimise excess weight.

An inflator elbow strain relief constructed from two-inch nylon webbing minimises wear on this connection.

Eclipse 30lbs and 40lbs wings come labelled as Traveler Pro with camp band slots.

The 30lbs wing is more suitable for a lighter profile diving rig such as a single 12L steel cylinder whereas the 40lbs is ideal for divers who want that "extra bit" of lift for emergency assistance or to carry heavier cylinder setups like a 15L cylinder.

• Lifetime warranty on inner bladder RF welded seams
• Lift capacities: 30lbs or 40lbs
• Outer shell 1680-denier ballistic nylon / Inner bladder 400-denier Nylon

Halcyon Backplate with Cinch Harness

The Halcyon Backplate with Cinch Adjustable Harness comes with either a steel or aluminium backplate. The Halcyon’s novel cinch harness kit is factory fitted to the backplate of your choice. Now you can adjust a harness in a flash.

Now you can change suits or divers and adjust the harness in a flash without compromising the harness integrity or Halcyon’s trademark, continuous webbing.

Adjustments to the Halcyon Cinch Adjustable Harness occur by simply sliding the harness through a unique assembly. You can even easily adjust the fit in or out of the water with a simple push or pull.

Halcyon backplates have been refined to provide the highest-quality finish and materials available. Small details, like the unique bends near the bottom of the plate, create an ergonomic curve, increasing diver comfort. Meanwhile, the precise fabrication process ensures the quality you have come to expect from Halcyon.

Which backplate to use?  While not set in stone, aluminium backplates are generally preferred by travelling or wet suit divers as they are lighter than their stainless steel counterparts. The popular backplate for drysuit diving is stainless steel, where the additional weight is a benefit (spreading out the weight needed to compensate for buoyancy while taking it off the diver's waist).

• High-grade, polished 304 stainless steel or hard-coat aluminium
• Bare backplate weight: Steel 2.22kg / Ali 0.77kg
• Size: 26cm x 39.3cm

Halcyon Single Tank Adapter

The stainless steel Halcyon Single Tank Adapter is designed to attach a backplate and single wing onto the single cylinder. The secure cam bands come with stainless steel buckles and Octogrip Pads to prevent sliding.

Halcyon ACB Weight System

The integrated Halcyon ACB Weight System pockets are an ideal solution for divers seeking quick-release weight. Each weight pocket can hold up to 5lbs/2.3kg soft or hard weights.

The vertical orientation consumes less space and the side release buckle prevents accidental weight loss but can be quickly released. The removable weight pouch features an easy-carry handle.

A simple tri-glide connection secures the ACB pockets (Active Control Ballast) on the harness waistband and allows the mounting of a primary light behind.

Halcyon Deluxe Shoulder and Backplate Bads

Halcyon Deluxe Shoulder Pads and a Backplate Pad offer ultimate comfort while diving in thinner exposure suits.

Adjustable Shoulder Pads feature movable Velcro tabs for a custom fit around shoulder D-ring and harness accessories (e.g. backup light).

The backplate pad also features a storage pocket allowing the diver to carry a surface marker or lift bag in a streamlined position.

Download the Halcyon Buoyancy Compensator Owners Manual

Halcyon Regulators

Halcyon H-50D First Stage

The Halcyon H-50D first stage is a high-performance diaphragm design is fully sealed and purpose-built for harsh conditions like ice or environmentally contaminated environments. Diaphragm first stages are historically popular with cold water divers, and the Halcyon H-50D was engineered for extreme conditions.

Environmentally sealed

The balanced, environmentally sealed diaphragm first stage performs better in cold water than any other diaphragm regulator while supplying consistent performance at varying tank pressures and depths; you will enjoy smooth, easy breathing throughout your dive.

The dry, balance chamber diaphragm design prevents water entry into the first stage mechanism and enhances a trouble-free operation; this is true even in the coldest conditions.

First stage ports

Two opposing high-pressure ports allow you to choose where to route your SPG and allow the use of accessories. Most Halcyon divers route their pressure gauge to the left, but the Halcyon H-50D allows flexibility with any configuration you choose; these options provide freedom to support personalised and advanced hose routing configurations.

Four low-pressure ports allow you to customise your hose routing for comfort and convenience. The H-50D features four stationary low-pressure ports with high flow options, ensuring the best air delivery with up to 15% more air than other LP ports.

• Balanced, sealed diaphragm
• Dry balance chamber
• 2 x High-pressure Ports, 4 x Low-pressure Ports (3/8)
• 300-bar DIN, compatible with 40% Nitrox

The Halcyon 50D Single Cylinder Regulator Set is an excellent long hose setup for single-cylinder diving. The robust Halcyon H-50D first stage is paired with a Halcyon Halo second stage as a main and Halcyon Aura as a backup regulator. The set has a long main regulator hose and a short backup regulator hose.

Both Halo and Aura second stages feature an Air Control Vane (ACV) that offers the ability to fine-tune breathing. The ACV uses vacuum-assist technology to reduce the work of breathing and increase diver comfort.

This level of refinement is available on all Halcyon second stages. ACV in the “dive” position gives powerful breathing support, while ACV in the “Halcyon” position helps prevent free flows; this can be helpful on the surface, when diving in currents, while scootering, or when the Aura is used as a backup regulator.

Primary 2nd Stage Regulator - Halcyon Halo

The Halcyon Halo second stage offers steadfast reliability and impeccable performance; two methods of breathing adjustment make it the top choice for demanding divers.

The Halo provides amazingly smooth performance in all conditions providing unsurpassed performance with enhanced technology.

Breathing underwater should feel natural, and that experience is one of the things that most clearly separates Halcyon’s second stages. You will be hooked as soon as you experience the smooth, high volume of air delivered by a Halo.

Balanced, adjustable downstream valve

Balanced, downstream valve offers incredibly smooth breathing in all conditions. The design slightly offsets the force of the downstream air entering from the first stage, allowing reduced spring tension and a decreased inhalation resistance.

Adjustable inhalation control

Adjustable inhalation control refines breathing effort through an easy access control knob; this allows the demanding diver to fine-tune the second stage’s air delivery.

• Compatible with 40% Nitrox (outside the EU)
• Adjustable downstream valve
• Air Control Vane

Backup Second Stage Regulator - Halcyon Aura

Halcyon Aura second stage regulators provide a simple, compact design that makes breathing underwater feel natural. This high-quality second stage delivers air in a smooth, dependable fashion.

Halcyon’s Aura second stage comes with a single adjustment control and a pre-set inhalation effort that suits most common diving situations; this feature makes it a common selection as a backup regulator.

Classic downstream

Classic downstream valve style second stages have an impressive safety record and are commonly accepted as an extremely reliable design.

Part of their reliability results because the downstream valve opens in the same direction as the incoming airflow; a spring counteracts the force of the incoming air.

This design requires a small inhalation to overcome the spring tension and open the valve. The spring pressure is adjusted at the factory and allows easy breathing and consistent performance.

• Compatible with 40% Nitrox (outside EU)
• Non-adjustable downstream valve
• Air Control Vane

Halcyon Master Pressure Gauge

The 63mm Halcyon Master Gauge is well suited as a primary SPG. The clear display is easy to read in all diving conditions. High-quality materials, and a highly visible, luminescent face make this a common favorite among divers in all environments.

• Diameter 63mm
• 0-360bar
• Nickel-plated brass
• Mineral glass lens

 ⏎ Download the Halcyon Regulators Manual

SHIPPING:

We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.

Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information on delivery terms and returns.

Our 2023 shipping rates are as follows:

• UK mainland orders £45 and over: FREE - DPD Delivery
• UK mainland orders under £45: £4.90 Fixed Rate - DPD Delivery
• Channel Islands, Isle of Man, Highlands & Northern Ireland: £14.9 Fixed Rate
• European Union: £13.90 + 5% of order value (maximum £30)
• Rest of the World: £19.50 + 8% of order value (maximum £55)
• BFPO Post Codes: £20

INTERNATIONAL EXCEPTIONS:

For international orders containing weights, cylinders (excluding suit inflation bottles) and Suex scooters please contact us in advance before placing your order.

These products are not included in our global max-capped shipping rates and are only shipped outside of UK mainland after freight cost is calculated based on total weight, dimensions of parcel, location of delivery and the courier service used. We will let you know what this cost will be before processing any order.

All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.

RETURNS & REFUNDS

Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.

Email us at sales@dirdirect.com or call us on +44(0)1305 824 555

Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The
goods will be inspected on arrival. 

Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges) may be deducted from any UK mainland refund unless linked to a fault/defect claim. 

Please contact us with your order number and name before sending any returns to:

Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Mereside, Portland
Dorset, DT5 1FD 
United Kingdom

Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information.