1.5L brushed aluminium suit inflation cylinder 200bar. Ideal size for CCR divers, longer decompression dives or multiple dives.
BESTSELLER ▸ Fully assembled O2 clean steel 2x12L Euro Twinset. These twinsets actually stand up on their own with a concave bottom and come with high quality BTS valves and continuous seam welding, 2 inch wide sturdy stainless bands with delrin thumbwheels. If you collect in store you get a free Air or 32% Nitrox fill.
Classic round bottom O2 clean steel 12L Euro cylinder twinset complete with stainless steel bands. Delivered fully assembled. In store collection from Portland includes free Air or 32% Nitrox fill. UK mainland delivery is available for a small additional charge.
1L Steel Suit Inflation and/or Argon Cylinder - 200bar. Popularly used with air but can also be used with argon.
O2 clean 3L white Aluminium 232bar cylinder with mono valve for scuba diving.
Aluminium Luxfer 7L stage cylinder / deco cylinder. O2 clean with 207bar operating pressure. The 'dirty beast' unbrushed aluminium.
O2 clean steel 232 bar 7L Eurocylinders Twinset with stainless steel bands. Delivered fully assembled. In store collection from Portland includes free Air or 32% Nitrox fill. UK mainland delivery is available for a small additional charge. For any other destination, please contact us prior to placing an order.
O2 clean steel 8.5L Eurocylinders Twinset with stainless steel bands. Delivered fully assembled. In store collection from Portland includes free Air or 32% Nitrox fill. UK mainland delivery is available for a small additional charge. For any other destination, please contact us prior to placing an order.
Aluminium 80cf / 11.1L stage cylinder / deco cylinder. O2 clean with 207bar operating pressure.
A complete suit inflation unit including 1L Steel Cylinder, BtS Mounting Straps and 1st Stage with pre-adjusted Over Pressure Relief Valve. Popularly used with air but can also be used with argon.
A complete suit inflation unit including 6cf (0.85L) Aluminium Cylinder, BtS Mounting Straps and 1st Stage with pre-adjusted Over Pressure Relief Valve. Popularly used with air but can also be used with argon.
O2 clean steel 232bar Euro cylinder with cylinder boot and valve. Available sizes: 10L, 12L and 15L.
O2 clean 232bar single diving cylinder with a high quality and robust MDE valve. Comes complete with rubber cylinder boot. Available sizes: 10L, 12L and 15L.
12 litre 232 bar O2 clean steel Euro flat (concave) bottom cylinder without cylinder boot.
Aluminium 0.85L suit inflation and/or argon cylinder. 200bar. Popularly used with air but can also be used with argon.
The Apeks Cylinder Pressure Tester comes with push button vent. DIN fitting. A 360bar HP gauge that can be fitted to a cylinder to check the pressure.
Apeks Left and Right handed valves for sidemount cylinder. Valves come with blanking plugs and are ideal to set up two tank independent systems with left and right handed valve control. The valves can later be 'manifolded' for backmount systems.
The BtS 230 bar DIN Single Tank Valves provide the excellent construction that you will want for your stage and primary bottles. O2 clean with M25 thread and tactile rubber knob.
The BtS 230 bar DIN Single Tank Valves provide the excellent construction that you will want for your stage and primary bottles. O2 clean with M26 thread and tactile rubber knob.
Valve plug for BtS G5/8 expandable cylinder valve. Available for the left or right hand valves.
Set of two mounting straps for drysuit inflation cylinders. Available in two sizes to fit cylinder diameters 90mm or 115mm or less.
Left and Right handed valves for sidemount systems. These reliable and sturdy valves come with blanking plugs and are ideal to set up two tank independent systems with left and right handed valve control. The valves can later be 'manifolded' for backmount systems. O2 clean
300bar DIN Decanting Hose without gauge for cylinders. Each side has a 300 bar DIN fitting with one end having the spring-operated purge button. Ideal to decant contents of one cylinder to another.
DIN Adaptor Insert to 232 bar DIN cylinder valves to a A-Clamp / Yoke fitting. The insert screws into your M25 valve with the appropriate allen key. Size of allen key required may vary.
Test the pressure of your tanks before heading off for a dive site. High quality DIN fitting pressure testing gauge with release valve to gauge tank content pressure.
300bar DIN Decanting whip with gauge. The hose comes with two 300 bar ends and a 400 bar pressure gauge on one side with a spring-based purge button on the other side.
Plastic dust cap for DIN cylinder valves. The dust cap comes with a "curly" string and has an o-rin inside of it.
Dir Zone Stage Rigging Kit for 80cf, 40cf and 7L aluminium cylinders.
Keep regulator hoses lying flat and avoid kinking. Silicone strips on the inside of the band grip the tank and keep the Dive Rite Deluxe Hose Retainer from rolling.
Dive Rite Hose Retainer is ideal for stage bottles, bailouts or sidemount configurations. This is Dive Rite's superior alternative for keeping those hoses under control.
O2 clean rugged barrel type BtS Isolator Bar for twinsets. Suitable for 232bar and 300bar. Available in three sizes.
Mark the contents of your tanks with these handy stickers on a roll. Perforated for ease of use. Contains spaces to mark your initials, date, contents. Includes over 500 stickers per roll.
Metric GUE MOD decals for standard gases. Three-inch black letters on a reflective background ensure high visibility.
Halcyon Stage Rigging Kit provides a simple but elegant solution for stage/deco bottles. The kit includes everything you need to configure your single cylinder for technical or overhead diving. Available in kits for 40cf, 80cf and 7L aluminium cylinders.
Octogrip Super Cam buckle system securely holds the 14cf bottle to your single or double tank rig by attaching to a tank.
Halcyon Mounting Straps for 6cf and 1L drysuit inflation bottle. The mounting straps allow divers to secure a smaller inflation bottle directly to their backplate.
One metre of protective cover for jubilee clamps to avoid scratching of cylinders and damage to other equipment by sharp edges of the jubilee bands.
Replacement 1" Rubber band for aluminum 7L and 80cf or 40cf stage bottles
Self adhesive 8cm high letters & numbers ideal for marking cylinders. For diver initials and/or standard gas switch depths. After selecting a letter "continue shopping" to add more until you have exactly what you want.
Set of three 1kg coated V-weights for those who want to have the freedom to add and subtract integrated twinset weights for varying conditions. (Shipped within UK mainland only. Contact us for other delivery options.)
Coated 1kg or 2kg tail weight with stainless steel bar. (This item is only shipped within UK mainland. Contact us for other delivery options.)
O2 clean steel classic 10L Euro cylinders twinset complete with stainless steel bands. Delivered fully assembled. In store collection from Portland includes free Air or 32% Nitrox fill. UK mainland delivery is available for a small additional charge. For any other destination, please contact us prior to placing an order. Please note this is a Special Order listing and item advertised will be ordered in once an order is received.
Twinset Steel Cylinders 15 liter, 230 bar, O2 clean - stainless steel tankbands and rubber knob. In store collection from Portland includes free Air or 32% Nitrox fill. UK mainland delivery is available for a small additional charge. For any other destination, please contact us prior to placing an order.
Twinset Steel Cylinders 18 liter, 230 bar, O2 clean. Please note this is a Special Order listing and item advertised will be ordered in, once an online order is received.
Twinset Steel Cylinders 20 liter, 230 bar, O2 clean. Please note this is a Special Order listing and item advertised will be ordered in, once an online order is received.