XDeep Hydros Twinset Wing
The XDeep Hydros Twinset Wings have been designed to significantly reduce the bladder volume in the "dead zone" around the top of the wing. This makes it easier to get to your valves, and the reduced bladder volume in this area also makes hose routing easier.
Dispatched in 1 to 2 days
If you are looking for a modern and robust twinset wing system with good trim, easy access to twinset valves and high surface position XDeep Hydros Twinset Wing will meet your criteria.
XDeep has completely redesigned the classic twinset wing with the XDeep Hydros Wing. You will find the elements familiar and notice their attention to detail, transforming good into great. Every element has been addressed to ensure an enhanced diving experience.
Building all the elements around a carefully calculated geometry, XDeep significantly improved stability in the water by eliminating wing “dead zones” that trap air affecting buoyancy. Through a careful design of the top of the wing reaching valves has been made easier.
XDeep Hydros Twinset Wings are available with 40lbs or 50lbs lift and as a complete XDeep Hydros Wing System with backplate and harness.
Trim and Stability with XDeep Hydros
Learning how to hold good trim and a stable position in the water is often the hardest skill for a new technical diver. Experienced technical divers want their equipment to help, not be something they must compensate for. The XDeep Hydros Wing was designed so that the buoyancy in the wing perfectly matches the centre of gravity of the gas in your twinset.
XDeep Hydros 40 and 50 twinset wings were built in such a way that their centre of buoyancy is placed on the same level as the gravity centre of gas in the cylinder. Irrespective of the inflation level of the wing, or the remaining cylinder pressure, the system trim will not change during the dive.
Valve Shutdowns – faster and safer
The last thing you want between you and your valves is a flap of the wing that slows down your response to a problem.
Shutdowns and valve management have been improved by reducing the volume of the wing in the valve area, and through the area where you want to route your hoses.
It’s easier to configure a clean and tidy hose routing, leaving your valves clear and accessible.
Reduced drag but the same buoyancy
Smaller contour wings have less drag and a lower risk of entanglement. In classic twinset BCD designs if you reduce the contour of the wing, then you lose overall buoyancy. Not in the XDeep Hydros Wing.
By minimizing the dead zone in the Hydros twinset wing from the central part of the bladder, XDeep has reduced the overall wing contour and kept all the buoyancy you need. A bit of lateral thinking!
XDeep Hydros is comfortable and high up at the surface
It is a challenge to design a wing that holds you in perfectly flat trim underwater yet holds you upright and high at the surface. Most designs want to push your face back underwater.
In the Hydros twinset wing the design ensures that most of the wing and therefore buoyancy is kept beneath the surface.
Even loaded with two full stages and gear for a deep technical dive, XDeep Hydros Twinset Wing will hold you high and comfortable out of the waves.
For safety reasons, no one needs to be convinced that you need a very durable outer shell for wreck diving. The outer shell of the Hydros wings is made of highly durable Cordura® 1100 dTEX produced in Germany.
Also, remember that the Cordura® fabric is more abrasion-resistant than other materials. Compared to other wings made of less expensive materials, the Hydros wing stays looking like new for a longer period.
We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.
Our 2023 shipping rates are as follows:
• UK mainland orders £45 and over: FREE - DPD Delivery
• UK mainland orders under £45: £4.90 Fixed Rate - DPD Delivery
• Channel Islands, Isle of Man, Highlands & Northern Ireland: £14.9 Fixed Rate
• European Union: £13.90 + 5% of order value (maximum £30)
• Rest of the World: £19.50 + 8% of order value (maximum £55)
• BFPO Post Codes: £20
For international orders containing weights, cylinders (excluding suit inflation bottles) and Suex scooters please contact us in advance before placing your order.
These products are not included in our global max-capped shipping rates and are only shipped outside of UK mainland after freight cost is calculated based on total weight, dimensions of parcel, location of delivery and the courier service used. We will let you know what this cost will be before processing any order.
All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.
RETURNS & REFUNDS
Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.
Email us at email@example.com or call us on +44(0)1305 824 555
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The
goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges) may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Dorset, DT5 1FD