The Santi Heated Vest Combo includes the Santi Heating Vest Flex 2.0, Santi 6Ah Battery and Drysuit Connector or Thermovalve. All in a neat package - ready to go.
The Santi Heated Vest Flex 2.0 is perfect for divers who need more insulation than can be provided by 'passive' undersuits. The Santi Heating Vest actually actively helps to keep you warm, it is not designed to warm you up but to limit the rate at which you become cold. As such the heating vest does not feel 'hot' but it's effects can be felt.
Santi Heated Vest Flex 2.0
The Santi Heated Vest Flex 2.0 was designed to provide the highest functionality and safety. Thanks to the fabric used, the vest provides thermal comfort even when a battery is not used.
Made of very flexible Climashield insulation fabric weighing 180g/m2, it consists of three layers – breathable Climashield Contour insulation covered with two protective layers made of polyester from the inside and outside. The external layer also has windproof properties.
The newest version of the Santi Heated Vest, thanks to new, non-quilted fabric quality, provides more warmth towards the body. It generates better thermal properties and keeps the heat trapped closer to the body for longer.
The sides and crotch strap of the vest feature wide elastic bands to allow the best adjustments.
The Heated Vest can be used directly over a thinsulate or 'sandwiched' between a thinsulate and baselayer to capture and spread heat proportionally.
- Handy pocket for power cord
- P-valve hose opening
- Wires covered with ultra-soft silicone isolation resistant to breaking
- Power cable resistant to high temperatures and cuts
- Power cable hidden in a handy pocket
- Ergonomic nesting and wires layout inside
- Weight: 180g/m2, isolation: 0.96 CLO
- Maximum heating temperature: 45ºC
- Maximum heating power: 55W
- Safety switch preventing from overheating and too strong current
Thermovalve or Drysuit Connector?
Both the Santi Thermovalve 303 and the Drysuit Connector are used to connect an external power source to your Santi heated vest, heated gloves or heated undersuit. Both are available in Apeks or SiTech fittings.
The SANTI Drysuit Connector does this by being attached to your existing drysuit inflation valve, continuing to use the original valve for inflation and running power through the connector element. It adds 19mm height to your valve.
Thermovalve 303’s great advantage is placing the cable with the E/O connector in the down position, with the possibility of turning the head by 270 degrees, which allows for trouble-free connection of the hopper cable both in the position of the connector to the right and left.
Read our SANTI Thermovalve and Drysuit Connector comparison
Santi 6Ah Battery
The small and extremely light Santi 6Ah Battery can also be used for dive lights with an e/o connection. Modern lithium-ion batteries allow you to connect elements with a total power of up to 100W.
One touch is enough to turn the battery on. The built-in blue LED on the e/o cord lights up when the battery is switched on or is being charged. So you will always know if it’s on or off.
The battery canister has a built-in belt loop on the side.
- Santi Heated Gloves: 2hrs
- Santi Heated Vest: 1hrs 30min
- Santi Heated Vest & Gloves: 45min
- Height: 11.5cm / Diameter: 7.4cm / Weight: 0.68kg
- E/O cord length: 60cm
- Charging time: 4-5 hours
- Operation depth: 100m
- E/O cord connector with unique led illumination
- Piezo switch
- Belt loop (no need for clamps)
- Operating voltage: 12V
- Material: polyacetal, POM, Delrin
- Charger included
CLIK HERE to download the Santi 6Ah Battery Transport Certificate (PDF format)