Cart
Your cart is empty
Dispatched in 10 to 14 weeks
The Santi Enduro Drysuit features heavy-duty Cordura trilaminate for professional diving. A rugged, technical drysuit built for extreme durability.
The Santi Enduro Drysuit provides everything necessary for professional diving. Santi equipped this suit with a long front-entry zipper protected by an additional flap. Furthermore, the telescopic torso ensures a perfect fit and full range of motion.
Two large, solid cargo pockets include bungee strings for secure equipment mounting. Additionally, each pocket features a useful zipper-fastened compartment for your double-ender. These features make the Enduro a reliable choice for every mission.
Santi designed the Enduro drysuit specifically to withstand the toughest diving conditions. Their craftsmen use flat seams and a special Y-suit cut to ensure user comfort. Consequently, this suit remains well-prepared for the most demanding technical divers.
The material consists of a robust Cordura/Butylene/Polyester trilaminate with a density of 620 g/m2. This high-density fabric provides the ultimate shield against harsh environments. Experience classic durability and professional performance during your next dive.
Santi drysuits come standard with the innovative and comfortable Santi Smart Seals® System. These soft rings allow for a fast, easy seal exchange without using special tools. You can use any latex or silicone seal you like or currently have on hand. Consequently, you can easily replace a torn seal in the field.
The system also allows you to add the Santi Smart Gloves Ring System for use with dry gloves. Please note that you must purchase the ring system separately. This versatility ensures you are always ready for any diving environment.
On the Enduro Drysuit, you can choose the direction of the front zip. Santi offers the traditional Left-to-Right orientation for most divers. Alternatively, you may select Right-to-Left if you prefer that specific configuration.
Very few divers require a fully made-to-measure suit, as Santi Diving offers a wide range of standard sizes. With this in mind, Santi offers a free-of-charge Made-to-Fit service for any standard size suit ordered, sculpting it to a diver's measurements.
You can request up to 4 changes, ranging from 2cm to 5cm, to any of the standard size measurements other than height. For example: increase or decrease the inner leg by 2cm.
If you require more than 4 changes to perfect your suit, you can add two more changes for a small additional charge.
Deciding which Santi Drysuit would be best for you and what the differences are can be confusing. To help you, we have prepared SANTI DRYSUITS COMPARED. Hopefully, this will help, but please CONTACT us if you have any questions.
We will email you the details within two days to ensure we have captured everything accurately. Only when you are satisfied with the specifications will we place your order with Santi. Alternatively, you can contact us, and we will schedule an appointment for you to be measured in-store.
We will place your suit order with Santi as soon as you have confirmed and are happy with all the details. We will go through this process as quickly as possible so the suit can be ordered without any delays on our part.
All Santi drysuits are made to order, so estimated production times vary slightly depending on how busy Santi is or whether the production period falls within their holiday period.
Santi estimates a 7 to 9 week production time for standard-size suits, with or without modifications. The production time is a couple of weeks longer for a completely made-to-measure suit. Suits must then be checked, shipped from Poland and cleared through customs. This usually takes 2 to 3 weeks. Unfortunately, due to fluctuating demand, neither Santi nor we can guarantee suits within a specific period.
Once we have your suit and check it, we will email you to confirm you are not away and to arrange delivery.
FREE "Made to Fit"
Very few divers require a totally made to measure suit due to the wide range of standard sizes available from Santi Diving. With this in mind, Santi offers a free of charge Made-to-Fit service to any standard size suit ordered, sculpting standard suits to a divers' measurements.
With your order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the SANTI size chart.
| SANTI FlexSole and Neoprene Socks | XS | S | M | L | XL | 2XL | 3XL | 4XL |
| UK | 3-4 | 4-5 | 6-7 | 7-8 | 9-10 | 11 | 12-13 | 14-15 |
| EUROPE | 34 | 37-38 | 39-40 | 41-42 | 43-44 | 45-46 | 47-48 | 49-50 |
| US | 5 | 5-6 | 7-8 | 9 | 10-11 | 12 | 13-14 | 15 |
| Foot Length (cm) | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 |
| SANTI Hoods | S | M | L | XL | 2XL | |||
| HEAD CIRCUMFERENCE (cm) | <52 | 52.5-55 | 55.5-58 | 58.5-60 | 60.5> | |||
| SANTI Wrist Seals | XS | S | M | L | XL | 2XL | ||
| LATEX BOTTLE (cm) | <13.5 | 14-15.5 | 16-17.5 | 18-19.5 | 20-22 | 22.5< | ||
| LATEX CONED (cm) | na | <15.5 | 16-17.5 | 18< | na | na | ||
| SILICONE (cm) | na | <17.5 | na | 18< | na | na | ||
| SANTI Neck Seal | S | M | L | XL | 2XL | |||
| NECK CIRCUMFERENCE (cm) | <33.5 | 34-37.5 | 38-41.5 | 42-44.5 | 45> |
UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER:
It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.
HOW TO MEASURE YOURSELF FOR SANTI SUITS
Carefully watch SANTI's Instructions for Measuring video below. The video shows all measurements for made to measure suits. For standard size or Made-to-Fit measurements please use the Size Chart.
STEP-BY-STEP
Never take your own measurements yourself! Measurements should be taken by another person to make sure all measurements are taken tight up to the body and at correct placement for a specific measurement.
It is important that you stand straight, look forward and do not bend over while you are being measured. It is equally important to take the measurements only while wearing thin clothing, close to the body. Don’t leave any additional measurement allowance.
CHEST - on the widest point.
INNER ARM - from armpit to wrist.
BICEPS - widest point on the loose arm. If you have a visibly athletic figure it is advised to measure the biceps also with bent elbow.
FOREARM - in the widest point.
WAIST - measure on the belly button level. Remember to measure the waist line in the widest point on the belly button line. To measure a female waistline correctly, use any kind of "marker belt" and fasten it around the waist line.
HIPS - in the fullest point of the buttocks.
INNER LEG - hold one end of the measurement tape in the crotch and measure to the heel end.
THIGH - widest point approximately 5cm from the crotch area.
CALF - measure the calf at the widest point.
BODY TRUNK - hold one end of the tape on the central point of the neck end and lead the tape across the crotch to the back. Mark the place where tape ends and measure the rest of the line to the spine neck bone. Make sure the tape is close to the body including all the curves.
UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER:
It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.
| Material | Trilaminate fabric with Cordura (R) on the outside and polyester on the inside |
| Outer fabric | Cordura 620 g/m2, highly resistant to puncture and tearing, low stretch |
| Total weight in size L | 5,2 kg |
| Reinforcements of the model | Melco patches on the knees |
| Recommended diving | Recreational, technical and commercial diving (underwater work) |
| Leg cut | Legs cut only from the inside (from the crotch), classic stitched crotch |
| Torso cut | Y-cut torso, sleeves cut at the shoulders |
| Suspenders | inside suspenders with handy pocket |
| Zipper attachment side | options to choose from: left, right, back |
| Available women's cut and size | YES |
| Trilaminate elasticity scale on a scale of 5 | 1 |
| Pockets material | Enduro trilaminate, wide velcro flaps with handles, 2 main bottom water drains with rust-resistant grommets. |
| Left pocket | Large D-ring 1x (under the flap). Drainage x2 (grommets) |
| Right pocket | Small D-ring 2x (sides). Drainage x2 (grommets). Wetnotes |
| 4 mounting points in pockets | Yes |
| Size of technical pockets | 26,5cm x 18cm x 6cm |
| Size of small pockets | 23 cm x 17 cm x 9/8,5 cm |
| Internal pocket with adjustable suspenders | YES |
| Covered zipper with protective flap | No |
| Bag | Classic drysuit travel bag |
| Accessories | Medium pressure hose 75 cm, talk, mask strap, instruction, zipper lube, certificate, manual |
SHIPPING:
We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.
Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information on delivery terms and returns.
Our current shipping rates are as follows:
*The dispatch days listed in our product listings refer to working days, excluding weekends and UK holidays. Products that need to be ordered from the manufacturer or distributor's stock, are temporarily out of stock, are subject to backorders, or are marked as Special Orders may take longer to dispatch. We will notify you of this once your order is confirmed.
INTERNATIONAL EXCEPTIONS:
For international orders containing weights, cylinders (excluding suit inflation bottles), and Suex scooters, please contact us in advance before placing your order.
These products are not included in our global max-capped shipping rates. They are only shipped outside the UK mainland after the freight cost is calculated based on the parcel's total weight, dimensions, delivery location, and the courier service used. We will let you know the cost before processing any order.
All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.
RETURNS & REFUNDS
We offer a 30 day return for any product sold under our Returns & Refunds Policy Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.
Email us at sales@dirdirect.com or call us on +44(0)1305 824 555
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges i.e. Free shipping for orders £45 and above) the UK shipping rate may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Mereside, Portland
Dorset, DT5 1FD
United Kingdom
Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information.
