Santi E.Space SE Drysuit - Made to Measure

SANTI E.Space SE Drysuit - Made to Measure

The made to measure Santi E.Space SE Drysuit represents a refreshed version of the classic base model. Santi constructed this suit using a moderately light yet extremely durable trilaminate of Nylon, Butylene, and Polyester. 

Furthermore, the flexible fabric ensures that the suit remains robust during demanding underwater tasks. Like all Santi drysuits, this model is cut to fit easily over any figure. Consequently, it provides a comfortable fit that does not limit your movements in any direction.

• Durable Trilaminate fabric for long-lasting protection against wear.
• Ergonomic Y-cut design to provide maximum freedom of movement.
• Spacious construction that accommodates thick undersuits or heating systems.
• Reinforced seams specifically designed for intense technical environments.

The classic, ergonomic Y-cut features minimal stitching areas to allow for great mobility underwater. Because of this spacious design, you can wear the thickest heating garments without feeling restricted. 

Santi highly recommends the E.Space drysuit for intense technical diving, including cave and wreck exploration. Therefore, this suit offers the perfect balance of classic comfort and rugged performance. Invest in this reliable drysuit for your next challenging underwater mission.

Santi Smart Seal System

Santi drysuits come standard with the innovative and comfortable Santi Smart Seals® System. These soft rings allow for a fast, easy seal exchange without using special tools. You can use any latex or silicone seal you like or currently have on hand. Consequently, you can easily replace a torn seal in the field.

The system also allows you to add the Santi Smart Gloves Ring System for use with dry gloves. Please note that you must purchase the ring system separately. This versatility ensures you are always ready for any diving environment.

Santi E.Space SE Drysuit Features

• Telescopic torso
• Santi SmartSeals® System with latex or silicone wrist seals
• Two cargo pockets
• Internal suspenders with a pocket
• Neoprene boots, Flexsole boots or neoprene socks
• Apeks or SiTech valves
• Choice of front zip direction
• Fitted latex or neoprene neckseal
• Optional SiTech Quick Neck Ring (for suits with shoulder width above 43cm)
• Santi Hood and drysuit bag included
• Weight 4.8kg (size L)

Front Zip Direction

On the E.Space SE Drysuit, you can choose the direction of the front zip. Santi offers the traditional Left-to-Right orientation for most divers. Alternatively, you may select Right-to-Left if you prefer that specific configuration. 

Which Santi drysuit is best for me?

Deciding which Santi Drysuit would be best for you and what the differences are can be confusing. To help you, we have prepared SANTI DRYSUITS COMPARED. Hopefully, this will help, but please CONTACT us if you have any questions.

What happens after I place my online order?

We will email you the details within two days to ensure we have captured everything accurately. Only when you are satisfied with the specifications will we place your order with Santi. Alternatively, you can contact us, and we will schedule an appointment for you to be measured in-store.

How long does it take to get my suit?

We will place your suit order with Santi as soon as you have confirmed and are happy with all the details. We will go through this process as quickly as possible so the suit can be ordered without any delays on our part.

All Santi drysuits are made to order, so estimated production times vary slightly depending on how busy Santi is or whether the production period falls within their holiday period.

Santi estimates a 7 to 9 week production time for standard-size suits, with or without modifications. The production time is a couple of weeks longer for a completely made-to-measure suit. Suits must then be checked, shipped from Poland and cleared through customs. This usually takes 2 to 3 weeks. Unfortunately, due to fluctuating demand, neither Santi nor we can guarantee suits within a specific period.

Once we have your suit and check it, we will email you to confirm you are not away and to arrange delivery.

UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER:
It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.

HOW TO MEASURE YOURSELF FOR SANTI SUITS

Carefully watch SANTI's "Instructions for Self-measuring" video below. The video shows all measurements for Made-to-Measure suits. 

STEP-BY-STEP

Download the Santi MADE TO MEASURE FORM. Use only a taylor's tape measure that has a centimeter scale (only use metric with cm).

Never take your own measurements yourself! Measurements should be taken by another person to make sure all measurements are taken tight up to the body and at correct placement for a specific measurement.

It is important that you stand straight, look forward and do not bend over while you are being measured. It is equally important to take the measurements only while wearing thin clothing, close to the body. Don’t leave any additional measurement allowance.

HEAD - approximately 1cm above the eyebrows to choose the correct hood size.
NECK - above the t-shirt line, under the Adam’s apple and the end of the neck.
BODY TRUNK - hold one end of the tape on the central point of the neck end and lead the tape across the crotch to the back. Mark the place where tape ends and measure the rest of the line to the spine neck bone. Make sure the tape is close to the body including all the curves.
SHOULDER TO SHOULDER - back shoulders length from one top arm bone to another.
OUTER ARM LENGHT - from the back neck spine bone to the wrist while the arm is fully stretched.
INSIDE ARM LENGHT - from armpit to wrist.
LADIES ONLY / SIDE TRUNK LENGHT - from the armpit to the waist line.
BICEPS - widest point on the loose arm. If you have a visibly athletic figure it is advised to measure the biceps also with bent elbow.
FOREARM - in the widest point.
WRIST - between the palm and the wrist bone.
CHEST - first measure the chest in rest and then after breathing in air. Normally the difference should be around 3-5cm. For ladies measure in the fullest point of the bust, preferably while wearing a bra.
WAIST - measure on the belly button level. Remember to measure the waist line in the widest point on the belly button line. To measure a female waistline correctly, use any kind of "marker belt" and fasten it around the waist line.
LADIES ONLY / BACK HEIGHT - centrally from the neck spine bone to the waist line marked with the belt.
LADIES ONLY / CHEST HEIGHT - from the soft neck area (where the neck ends) to the bust line in the fullest point.
HIPS - in the fullest point of the buttocks.
THIGH - widest point approximately 5cm from the crotch area.
CROTCH TO KNEE - from crotch to knee.
CROTCH TO FLOOR - hold one end of the measurement tape in a convenient place in the crotch and measure to the heel end.
CALF 1 - measure the calf in the widest point.
CALF 2 - height from the widest point of the calf to the floor.
CALF 3 - measure the calf 20cm from the floor.
ANKLE - measure the ankle on the ankle bone.
FOOT - place the tape on the floor and step on it to measure from end of heal to end of toes.

UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER:
It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.

SHIPPING:

We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.

Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information on delivery terms and returns.

Our current shipping rates are as follows:

• UK mainland orders £50 and over: FREE - DPD or alternative courier delivery*
• UK mainland orders under £50: £5.50 Fixed Rate - DPD or alternative courier delivery*
• Scotland Highland (inc. AB31+ Post Codes), Scottish Islands & Isle of Man: £11.00 Fixed Rate 
• Channel Islands & Northern Ireland: £16.00 Fixed Rate
• European Union: £15.70 + 6% of order value (maximum £35)
• Rest of the World: £22.00 + 9% of order value (maximum £65)
  
• BFPO Post Codes: £23.00 (see Delivery Terms for BFPO at end of this page)
  
• FPO & APO Unfortunately, we are unable to arrange delivery to FPO/APO addresses
• PO Boxes - All our PO Box deliveries need to be signed for, therefore, unless prior arrangements are made with us, we do not deliver to PO Boxes.

*The dispatch days listed in our product listings refer to working days, excluding weekends and UK holidays. Products that need to be ordered from the manufacturer or distributor's stock, are temporarily out of stock, are subject to backorders, or are marked as Special Orders may take longer to dispatch. We will notify you of this once your order is confirmed.

INTERNATIONAL EXCEPTIONS:

For international orders containing weights, cylinders (excluding suit inflation bottles), and Suex scooters, please contact us in advance before placing your order.

These products are not included in our global max-capped shipping rates. They are only shipped outside the UK mainland after the freight cost is calculated based on the parcel's total weight, dimensions, delivery location, and the courier service used. We will let you know the cost before processing any order.

All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.

RETURNS & REFUNDS

We offer a 30 day return for any product sold under our Returns & Refunds Policy Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.

Email us at sales@dirdirect.com or call us on +44(0)1305 824 555

Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival. 

Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges i.e. Free shipping for orders £45 and above) the UK shipping rate may be deducted from any UK mainland refund unless linked to a fault/defect claim. 

Please contact us with your order number and name before sending any returns to:

Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Mereside, Portland
Dorset, DT5 1FD 
United Kingdom

Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information.