Santi E.Space SE Drysuit is a refreshed version of Santi’s base drysuit. E.space SE is made of moderately light and extremely durable yet flexible fabric trilaminate. E.Space drysuit is recommended for intense, cave and wreck technical diving.
Santi E.Space SE Drysuit is a refreshed version of Santi’s base drysuit. E.space SE is made of moderately light and extremely durable yet flexible fabric trilaminate of Nylon/Butylene/Polyester.
Like all Santi drysuits Santi E.Space SE Drysuit is cut in a way that makes it easy to adjust to any figure and does not limit movements in any direction.
Classic, ergonomic Y-cut with minimal areas of stitching allows for great freedom of movements underwater.
Spacy construction leaves great comfort even with the thickest undersuit or heating garment.
E.Space drysuit is recommended for intense, cave and wreck technical diving.
Santi E.Space Drysuit Key Features
Telescopic torso
Two cargo pockets
Kevlar knee pads
Neoprene boots, Flexsole boots or neoprene socks
Internal suspenders with a pocket
Apeks or SiTech valves
Santi SmartSeals® System with latex or silicone wrist seals
Fitted latex or neoprene neckseal
Optional SiTech Quick Neck Ring (for suits with shoulder width above 43cm)
Santi 3mm, 6mm or 8mm Hood
Classic drysuit bag
Total weight: 4kg
Fabric: Nylon/Butylene/Polyester 440g/m2
Available in male and female sizing
Santi Smart Seal System
Santi drysuits come as a standard with an innovative and comfortable Santi Smart Seals® System. Soft rings allow fast and easy seal exchange for any seal you like or have at hand without needing special tools.
The Smart Seals system replaces the standard wrist seals attachment in drysuit cuffs and works with any type of wrist seals available on the market – latex or silicone. There is no need for specially designed or dedicated seals, meaning you can carry spares and change a torn seal in the field.The Smart Seals System also gives the possibility of adding dry gloves using Santi Smart Gloves Ring System (purchase separately).
Santi Neoprene Hood
The suit comes with Santi's Neoprene Hood with an innovative cut made from a very flexible neoprene. The outer shell is covered with jersey, while the inner coating is “smooth skin” type. These 6mm and 8mm hoods adapt perfectly to the shape of the head and are easy to put on and take off, even when wet.
Front Zip Direction
For the E.Lite Plus drysuit, it is possible to have the front zip in two different directions. The choice is yours: traditional Left to Right or if you prefer Right to Left.
Front Zip Direction
For the Edge drysuit, it is possible to have the front zip in two different directions. The choice is yours: traditional Left to Right or if you prefer Right to Left.
FREE "Made to Fit" service
Very few divers require a made-to-measure suit due to the wide range of standard sizes available from Santi Diving. With this in mind, Santi offers a free-of-charge Made-to-Fit service to any standard Santi suits ordered, sculpting standard suits to the measurements of the diver.
With your suit order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under the chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the Santi size chart.
If you need more than four changes to make your suit perfect, you can add two more changes for a small additional charge.
Which Santi drysuit is best for me?
Deciding which Santi Drysuit would be best for you and what the differences are can be confusing. To help you, we have prepared SANTI DRYSUITS COMPARED. Hopefully, this will help, but please CONTACT us if you have any question
What happens after I place my online order?
We will email you the details within two days to ensure we have captured everything accurately. Only when you are satisfied with the specifications will we place your order with Santi. Alternatively, you can contact us, and we will schedule an appointment for you to be measured in-store.
How long does it take to get my suit?
We will place your suit order with Santi as soon as you have confirmed and are happy with all the details.
All Santi drysuits are made to order; therefore, estimated production times vary slightly depending on Santi's workload or if the production period coincides with their holiday schedule.
Santi estimates that the production time for standard-size suits is between 7 to 9 weeks. The production time is typically a few weeks longer for a modified or fully made-to-measure suit.
Suits must then be checked and tested, shipped from Poland to us in the UK, and cleared by customs. This usually takes 1 to 2 weeks.
Unfortunately, due to the fluctuation in demand, neither we nor Santi can guarantee suits within a specific period.
Once we have your suit and we check it, we will email you to make sure you are not away and take delivery.
SKU:
1002
FREE "Made to Fit"
Very few divers require a totally made to measure suit due to the wide range of standard sizes available from Santi Diving. With this in mind, Santi offers a free of charge Made-to-Fit service to any standard size suit ordered, sculpting standard suits to a divers' measurements.
With your order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the SANTI size chart.
SANTI FlexSole and Neoprene Socks
XS
S
M
L
XL
2XL
3XL
4XL
UK
3-4
4-5
6-7
7-8
9-10
11
12-13
14-15
EUROPE
34
37-38
39-40
41-42
43-44
45-46
47-48
49-50
US
5
5-6
7-8
9
10-11
12
13-14
15
Foot Length (cm)
23
24
25
26
27
28
29
30
SANTI Hoods
S
M
L
XL
2XL
HEAD CIRCUMFERENCE (cm)
<52
52.5-55
55.5-58
58.5-60
60.5>
SANTI Wrist Seals
XS
S
M
L
XL
2XL
LATEX BOTTLE (cm)
<13.5
14-15.5
16-17.5
18-19.5
20-22
22.5<
LATEX CONED (cm)
na
<15.5
16-17.5
18<
na
na
SILICONE (cm)
na
<17.5
na
18<
na
na
SANTI Neck Seal
S
M
L
XL
2XL
NECK CIRCUMFERENCE (cm)
<33.5
34-37.5
38-41.5
42-44.5
45>
UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER: It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.
HOW TO MEASURE YOURSELF FOR SANTI SUITS
Carefully watch SANTI's Instructions for Measuring video below. The video shows all measurements for made to measure suits. For standard size or Made-to-Fit measurements please use the Size Chart.
STEP-BY-STEP
Never take your own measurements yourself! Measurements should be taken by another person to make sure all measurements are taken tight up to the body and at correct placement for a specific measurement.
It is important that you stand straight, look forward and do not bend over while you are being measured. It is equally important to take the measurements only while wearing thin clothing, close to the body. Don’t leave any additional measurement allowance.
CHEST - on the widest point. INNER ARM - from armpit to wrist. BICEPS - widest point on the loose arm. If you have a visibly athletic figure it is advised to measure the biceps also with bent elbow. FOREARM - in the widest point. WAIST - measure on the belly button level. Remember to measure the waist line in the widest point on the belly button line. To measure a female waistline correctly, use any kind of "marker belt" and fasten it around the waist line. HIPS - in the fullest point of the buttocks. INNER LEG - hold one end of the measurement tape in the crotch and measure to the heel end. THIGH - widest point approximately 5cm from the crotch area. CALF - measure the calf at the widest point. BODY TRUNK - hold one end of the tape on the central point of the neck end and lead the tape across the crotch to the back. Mark the place where tape ends and measure the rest of the line to the spine neck bone. Make sure the tape is close to the body including all the curves.
UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER: It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.
SHIPPING:
We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.
• UK mainland orders £45 and over: FREE • UK mainland orders under £45: £4.90 Fixed Rate • Scottish Higland and Islands & Isle of Man: £9.90 Fixed Rate • Channel Islands & Northern Ireland: £14.90 Fixed Rate • European Union: £13.90 + 5% of order value (maximum £30) • Rest of the World: £19.50 + 8% of order value (maximum £55) • BFPO Post Codes: £20
INTERNATIONAL EXCEPTIONS:
For international orders containing weights, cylinders (excluding suit inflation bottles) and Suex scooters please contact us in advance before placing your order.
These products are not included in our global max-capped shipping rates and are only shipped outside of UK mainland after freight cost is calculated based on total weight, dimensions of parcel, location of delivery and the courier service used. We will let you know what this cost will be before processing any order.
All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.
RETURNS & REFUNDS
We offer a 30 day return for any product sold under our Returns & Refunds Policy Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges i.e. Free shipping for orders £45 and above) the UK shipping rate may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns Unit 1, Maritime Business Centre Mereside, Portland Dorset, DT5 1FD United Kingdom
