Santi E.Motion+ Drysuit - Women's

SANTI E.MOTION+ Drysuit - Light & Easy

The women's Santi E.Motion+ drysuit is made from lightweight, quick-drying trilaminate, this drysuit provides exceptional lightness and comfort. Reinforced in key areas with E.lite fabric. It is suitable for all technical and recreational divers who value freedom of movement while benefiting from increased resistance to damage.

The low fabric weight ensures a close fit to the silhouette and great comfort when donning the drysuit.

E.Motion Plus dries very swiftly and offers increased flexibility, making it a top-tier drysuit. It combines durability with high performance.

As in any of Santi drysuits, E.Motion Plus comes with two big and solid cargo pockets with bungee strings to mount the equipment. Both pockets have a useful additional zipper fastened pocket for double ender.

A special cut of the crotch pad allows for comfortable leg movements. The E.Motion Plus suit is equipped with a YKK Aquaseal plastic zipper which is very durable but also light and flexible. It is highly resistant to dirt and needs only minimal care in the docking area.

Two different materials

Durable E.Lite material is used in critical areas, whereas the lightweight material provides flexibility for the top and front part of the suit. The result is a modern drysuit with a high degree of comfort and protection where necessary without compromising mobility.

The top part of the drysuit and the top front of the legs are made of flexible E.Motion fabric (Ripstop Nylon/Butylene 235g/m2).

Elbows, belly, lower back area, crotch pad, back of legs and lower part of front legs are made of E.Lite fabric (Rip Stop Nylon/Butylen/Poliester 535g/m2)

Santi Smart Seal System

Santi drysuits come standard with the innovative and comfortable Santi Smart Seals® System. Soft rings allow fast, easy seal exchange for any seal you like or have on hand, without special tools.



The Smart Seals system replaces the standard wrist seals attachment in drysuit cuffs and works with any type of wrist seals available on the market – latex or silicone. There is no need for specially designed or dedicated seals, meaning you can carry spares and change a torn seal in the field.

The Smart Seals System also gives the possibility of adding dry gloves using the Santi Smart Gloves Ring System (purchased separately).

Santi E.Motion+ Drysuit features

• Telescopic torso
• Choice of front zip direction
• Two cargo pockets
• Internal suspenders with a pocket
• Kevlar knee pads
• Flexsole boots or neoprene socks
• Apeks or SiTech valves
• Santi SmartSeals® System with latex or silicone wrist seals
• Fitted latex or neoprene neckseal
• Optional SiTech Quick Neck Ring (for suits with shoulder width above 43cm)
• Santi 3mm, 6mm or 8mm Hood
• Waterproof drysuit bag
• Weight 3.9kg (size L)

Front Zip Direction

On the E.Motion+ drysuit, the front zip can be used in two directions. The choice is yours: traditional Left-to-Right or, if you prefer, Right-to-Left.

Which Santi drysuit is best for me?

Deciding which Santi Drysuit would be best for you and what the differences are can be confusing. To help you, we have prepared SANTI DRYSUITS COMPARED 2023. Hopefully, this will help, but please CONTACT us if you have any questions.

FREE "Made to Fit" service

Very few divers require a fully made-to-measure suit, as Santi Diving offers a wide range of standard sizes. With this in mind, Santi offers a free-of-charge Made-to-Fit service for any standard Santi suit ordered, sculpting it to a diver's measurements.

With your suit order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under the chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the Santi size chart.

If you require more than 4 changes to make your suit perfect, you can add two more changes for a small additional charge.

What happens after I place my online order?

We will email you the details within two days to ensure we have captured everything accurately. Only when you are satisfied with the specifications will we place your order with Santi. Alternatively, you can contact us, and we will schedule an appointment for you to be measured in-store.

How long does it take to get my suit?

We will place your suit order with Santi as soon as you have confirmed and are happy with all the details. We will go through this process as quickly as possible so the suit can be ordered without any delays on our part.

All Santi drysuits are made to order, so estimated production times vary slightly depending on how busy Santi is or whether the production period falls within their holiday period.

Santi estimates a 7 to 9 week production time for standard-size suits, with or without modifications. The production time is a couple of weeks longer for a completely made-to-measure suit. Suits must then be checked, shipped from Poland and cleared through customs. This usually takes 2 to 3 weeks. Unfortunately, due to fluctuating demand, neither Santi nor we can guarantee suits within a specific period.

Once we have your suit and check it, we will email you to confirm you are not away and to arrange delivery.

FREE "Made to Fit"

Very few divers require a totally made to measure suit due to the wide range of standard sizes available from Santi Diving. With this in mind, Santi offers a free of charge Made-to-Fit service to any standard size suit ordered, sculpting standard suits to a divers' measurements.

With your order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the SANTI size chart.

UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER:
It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.

HOW TO MEASURE YOURSELF FOR SANTI SUITS

Carefully watch SANTI's Instructions for Measuring video below. The video shows all measurements for made to measure suits. For standard size or Made-to-Fit measurements please use the Size Chart.

STEP-BY-STEP

Never take your own measurements yourself! Measurements should be taken by another person to make sure all measurements are taken tight up to the body and at correct placement for a specific measurement.

It is important that you stand straight, look forward and do not bend over while you are being measured. It is equally important to take the measurements only while wearing thin clothing, close to the body. Don’t leave any additional measurement allowance.

CHEST - on the widest point.
INNER ARM - from armpit to wrist.
BICEPS - widest point on the loose arm. If you have a visibly athletic figure it is advised to measure the biceps also with bent elbow.
FOREARM - in the widest point.
WAIST - measure on the belly button level. Remember to measure the waist line in the widest point on the belly button line. To measure a female waistline correctly, use any kind of "marker belt" and fasten it around the waist line.
HIPS - in the fullest point of the buttocks.
INNER LEG - hold one end of the measurement tape in the crotch and measure to the heel end.
THIGH - widest point approximately 5cm from the crotch area.
CALF - measure the calf at the widest point.
BODY TRUNK - hold one end of the tape on the central point of the neck end and lead the tape across the crotch to the back. Mark the place where tape ends and measure the rest of the line to the spine neck bone. Make sure the tape is close to the body including all the curves.

UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER:
It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.

SHIPPING:

We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.

Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information on delivery terms and returns.

Our current shipping rates are as follows:

• UK mainland orders £50 and over: FREE - DPD or alternative courier delivery*
• UK mainland orders under £50: £5.50 Fixed Rate - DPD or alternative courier delivery*
• Scotland Highland (inc. AB31+ Post Codes), Scottish Islands & Isle of Man: £11.00 Fixed Rate 
• Channel Islands & Northern Ireland: £16.00 Fixed Rate
• European Union: £15.70 + 6% of order value (maximum £35)
• Rest of the World: £22.00 + 9% of order value (maximum £65)
  
• BFPO Post Codes: £23.00 (see Delivery Terms for BFPO at end of this page)
  
• FPO & APO Unfortunately, we are unable to arrange delivery to FPO/APO addresses
• PO Boxes - All our PO Box deliveries need to be signed for, therefore, unless prior arrangements are made with us, we do not deliver to PO Boxes.

*The dispatch days listed in our product listings refer to working days, excluding weekends and UK holidays. Products that need to be ordered from the manufacturer or distributor's stock, are temporarily out of stock, are subject to backorders, or are marked as Special Orders may take longer to dispatch. We will notify you of this once your order is confirmed.

INTERNATIONAL EXCEPTIONS:

For international orders containing weights, cylinders (excluding suit inflation bottles), and Suex scooters, please contact us in advance before placing your order.

These products are not included in our global max-capped shipping rates. They are only shipped outside the UK mainland after the freight cost is calculated based on the parcel's total weight, dimensions, delivery location, and the courier service used. We will let you know the cost before processing any order.

All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.

RETURNS & REFUNDS

We offer a 30 day return for any product sold under our Returns & Refunds Policy Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.

Email us at sales@dirdirect.com or call us on +44(0)1305 824 555

Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival. 

Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges i.e. Free shipping for orders £45 and above) the UK shipping rate may be deducted from any UK mainland refund unless linked to a fault/defect claim. 

Please contact us with your order number and name before sending any returns to:

Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Mereside, Portland
Dorset, DT5 1FD 
United Kingdom

Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information.