The Santi E.Motion+ Ladies First Drysuit combines a feminine cut with durable E.Lite fabric. Experience a lightweight, flexible women's drysuit.
Quantity:
SANTI E.Motion+ Ladies First Drysuit - Combination of Lightness and Flexibility
The female-exclusive Santi E.Motion+ Ladies First Drysuit uses lightweight, quick-drying trilaminate to provide exceptional comfort. Santi reinforces key areas with E.Lite fabric to increase resistance to damage during demanding dives.
Consequently, this women's drysuit is perfectly suited to technical and recreational divers who value freedom of movement. The design specifically considers silhouette differences to underline an elegant, feminine look. Furthermore, it combines the best fabrics to ensure maximum protection at critical places.
Feminine ergonomic cut designed for an attractive and comfortable fit.
Lightweight trilaminate allows for effortless movement and easy transport.
Quick-drying technology ensures the suit is ready for back-to-back dives.
Unique colour options, including fuchsia, lime, or grey detailing.
This suit features two cargo pockets with bungee strings for secure equipment mounting. Both pockets include an additional zipper-fastened compartment for your double-enders. Additionally, the YKK Aquaseal plastic zipper remains durable, light, and highly resistant to dirt. A special cut in the crotch pad allows for comfortable leg movements. Therefore, you receive a high-performance drysuit that balances style with rugged durability.
Two Different Materials
Santi utilises two distinct materials to offer a modern drysuit with high comfort and protection. The flexible E.Motion fabric makes up the top part of the suit and the front legs. Meanwhile, the durable E.Lite material protects critical areas without compromising your mobility. This strategic blend ensures you remain agile while benefiting from heavy-duty reinforcement. Specifically, the elbows, belly, and lower back utilise the robust 535g/m2 fabric.
E.Motion Ripstop Nylon (235g/m2) for superior upper body flexibility.
E.Lite Ripstop blend (535g/m2) for maximum abrasion resistance.
Reinforced lower legs and crotch pad for long-lasting wear.
The result is a sophisticated suit that handles harsh conditions while feeling light on the body. Because we place the E.Lite fabric only where necessary, the suit maintains an elegant silhouette. This material combination represents the pinnacle of Santi textile technology.
Consequently, the Ladies First E.Motion+ stands out as a premier choice for explorers who refuse to compromise.
Santi Smart Seal System
Santi drysuits come standard with the innovative and comfortable Santi Smart Seals® System. These soft rings allow for a fast, easy seal exchange without using special tools. You can use any latex or silicone seal you like or currently have on hand. Consequently, you can easily replace a torn seal in the field.
The system also allows you to add the Santi Smart Gloves Ring System for use with dry gloves. Please note that you must purchase the ring system separately. This versatility ensures you are always ready for any diving environment.
Santi E.Motion+ Ladies First Drysuit features
Telescopic torso
Santi SmartSeals® System with latex or silicone wrist seals
Two cargo pockets
Internal suspenders with a pocket
Flexsole boots or neoprene socks
Apeks or SiTech valves
Choice of front zip direction
Fitted latex or neoprene neckseal
Optional SiTech Quick Neck Ring (for suits with shoulder width above 43cm)
Santi Hood and waterproof drysuit bag included
Weight 3.2kg (size L)
Front Zip Direction
On the E.Motion+ Ladies First Drysuit, you can choose the direction of the front zip. Santi offers the traditional Left-to-Right orientation for most divers. Alternatively, you may select Right-to-Left if you prefer that specific configuration.
FREE "Made to Fit" service
Very few divers require a fully made-to-measure suit, as Santi Diving offers a wide range of standard sizes. With this in mind, Santi offers a free-of-charge Made-to-Fit service for any standard size suit ordered, sculpting it to a diver's measurements.
You can request up to 4 changes, ranging from 2cm to 5cm, to any of the standard size measurements other than height. For example: increase or decrease the inner leg by 2cm.
If you require more than 4 changes to perfect your suit, you can add two more changes for a small additional charge.
Which Santi drysuit is best for me?
Deciding which Santi Drysuit would be best for you and what the differences are can be confusing. To help you, we have prepared SANTI DRYSUITS COMPARED. Hopefully, this will help, but please CONTACT us if you have any questions.
What happens after I place my online order?
We will email you the details within two days to ensure we have captured everything accurately. Only when you are satisfied with the specifications will we place your order with Santi. Alternatively, you can contact us, and we will schedule an appointment for you to be measured in-store.
How long does it take to get my suit?
We will place your suit order with Santi as soon as you have confirmed and are happy with all the details. We will go through this process as quickly as possible so the suit can be ordered without any delays on our part.
All Santi drysuits are made to order, so estimated production times vary slightly depending on how busy Santi is or whether the production period falls within their holiday period.
Santi estimates a 7 to 9 week production time for standard-size suits, with or without modifications. The production time is a couple of weeks longer for a completely made-to-measure suit. Suits must then be checked, shipped from Poland and cleared through customs. This usually takes 2 to 3 weeks. Unfortunately, due to fluctuating demand, neither Santi nor we can guarantee suits within a specific period.
Once we have your suit and check it, we will email you to confirm you are not away and to arrange delivery.
SKU:
1007LF
FREE "Made to Fit"
Very few divers require a totally made to measure suit due to the wide range of standard sizes available from Santi Diving. With this in mind, Santi offers a free of charge Made-to-Fit service to any standard size suit ordered, sculpting standard suits to a divers' measurements.
With your order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the SANTI size chart.
SANTI FlexSole and Neoprene Socks
XS
S
M
L
XL
2XL
3XL
4XL
UK
3-4
4-5
6-7
7-8
9-10
11
12-13
14-15
EUROPE
34
37-38
39-40
41-42
43-44
45-46
47-48
49-50
US
5
5-6
7-8
9
10-11
12
13-14
15
Foot Length (cm)
23
24
25
26
27
28
29
30
SANTI Hoods
S
M
L
XL
2XL
HEAD CIRCUMFERENCE (cm)
<52
52.5-55
55.5-58
58.5-60
60.5>
SANTI Wrist Seals
XS
S
M
L
XL
2XL
LATEX BOTTLE (cm)
<13.5
14-15.5
16-17.5
18-19.5
20-22
22.5<
LATEX CONED (cm)
na
<15.5
16-17.5
18<
na
na
SILICONE (cm)
na
<17.5
na
18<
na
na
SANTI Neck Seal
S
M
L
XL
2XL
NECK CIRCUMFERENCE (cm)
<33.5
34-37.5
38-41.5
42-44.5
45>
UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER: It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.
HOW TO MEASURE YOURSELF FOR SANTI SUITS
Carefully watch SANTI's Instructions for Measuring video below. The video shows all measurements for made to measure suits. For standard size or Made-to-Fit measurements please use the Size Chart.
STEP-BY-STEP
Never take your own measurements yourself! Measurements should be taken by another person to make sure all measurements are taken tight up to the body and at correct placement for a specific measurement.
It is important that you stand straight, look forward and do not bend over while you are being measured. It is equally important to take the measurements only while wearing thin clothing, close to the body. Don’t leave any additional measurement allowance.
CHEST - on the widest point. INNER ARM - from armpit to wrist. BICEPS - widest point on the loose arm. If you have a visibly athletic figure it is advised to measure the biceps also with bent elbow. FOREARM - in the widest point. WAIST - measure on the belly button level. Remember to measure the waist line in the widest point on the belly button line. To measure a female waistline correctly, use any kind of "marker belt" and fasten it around the waist line. HIPS - in the fullest point of the buttocks. INNER LEG - hold one end of the measurement tape in the crotch and measure to the heel end. THIGH - widest point approximately 5cm from the crotch area. CALF - measure the calf at the widest point. BODY TRUNK - hold one end of the tape on the central point of the neck end and lead the tape across the crotch to the back. Mark the place where tape ends and measure the rest of the line to the spine neck bone. Make sure the tape is close to the body including all the curves.
UNDERWATER EXPLORERS LTD/DIRDIRECT DRYSUIT DISCLAIMER: It is the customers responsibility to choose a correct drysuit size. All drysuits are made to order. Drysuit returns are not accepted under any circumstance unless Underwater Explorers Ltd/DirDirect has made a mistake. We do not take any responsibility for a fit of a made to measure drysuits unless measured by us. All drysuits are individually tested by manufacturers. Any isolated manufacturing fault(s) will be repaired, not replaced, under manufacturers warranty.
Material
Trilaminate fabric with thin Nylon on the outside and Nylon on the inside
Outer fabric
Ripstop Nylon 235 g/m2, moderately resistant to puncture and tearing, high stretch. Ripstop Nylon 535 g/m2, highly resistant to puncture and tearing, medium stretch.
Total weight in size L
3,2 kg
Reinforcements
Kevlar patches on the knees, bottom of the sleeves, crotch patch, legs from knees down, back of the legs, front torso, and lumbar belt made of E.lite fabric.
Recommended diving
Recreational and technical
Leg cut
Leg cut on both sides with a saddle-type crotch gusset
Torso cut
Y-cut torso, sleeves cut at the shoulders
Suspenders
Internal suspenders with handy pocket
Zipper attachment side
Options to choose from: left, right, back
Model version in the Ladies First line
In the Ladies First model version, there are 3 color options for finishing on a grey or black base, reduced pocket volume on the thighs, zipper from the right shoulder to the left hip
Trilaminate elasticity scale on a scale of 5
4
Pockets material
Deluxe pockets made of Ribstop E.lite trilaminate on the front, Cordura sides, foldable bellows of the pockets, wide velcro flaps with handles, water drains in the form of a silicone grid.
Left pocket
Flap with zipper + 2 thin elastic bands. Thick elastic band x2. Wetnotes + thin elastic band x1. Mesh drainage
Right pocket
Flap with zipper + 2 thin elastic bands. Thick elastic band x2. Wetnotes + thin elastic band x1. Mesh drainage
4 mounting points in pockets
Yes
Size of small pockets
23 cm x 17 cm x 9/8,5 cm
Capacity of small pockets
Approximately 3.4 liters.
Internal pocket with adjustable suspenders
Yes
Covered zipper with protective flap
Yes
Bag
LF water repellent travel bag
Accessories
LF afterdive beanie hat, medium pressure hose 75 cm, talk, mask strap, instruction, zipper lube, certificate, manual
SHIPPING:
We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.
FPO & APO Unfortunately, we are unable to arrange delivery to FPO/APO addresses
PO Boxes - All our PO Box deliveries need to be signed for, therefore, unless prior arrangements are made with us, we do not deliver to PO Boxes.
*The dispatch days listed in our product listings refer to working days, excluding weekends and UK holidays. Products that need to be ordered from the manufacturer or distributor's stock, are temporarily out of stock, are subject to backorders, or are marked as Special Orders may take longer to dispatch. We will notify you of this once your order is confirmed.
INTERNATIONAL EXCEPTIONS:
For international orders containing weights, cylinders (excluding suit inflation bottles), and Suex scooters, please contact us in advance before placing your order.
These products are not included in our global max-capped shipping rates. They are only shipped outside the UK mainland after the freight cost is calculated based on the parcel's total weight, dimensions, delivery location, and the courier service used. We will let you know the cost before processing any order.
All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.
RETURNS & REFUNDS
We offer a 30 day return for any product sold under our Returns & Refunds Policy Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges i.e. Free shipping for orders £45 and above) the UK shipping rate may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns Unit 1, Maritime Business Centre Mereside, Portland Dorset, DT5 1FD United Kingdom