Scubapro MK25 EVO G260 Regulator
Scubapro G260 MK25 EVO Regulator is aimed at technical divers. This system can face any dive situation with rock-solid performances and outstanding reliability. The G260 is a balanced adjustable second stage featuring metal components for excellent cold water resistance. MK25 EVO first stage provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
Dispatched in 1 to 2 days
Scubapro G260 MK25 EVO Regulator is aimed at technical divers, this system can face any dive situation with rock-solid performances and outstanding reliability.
The Scubapro G260 is a balanced adjustable second stage featuring metal components for excellent cold water resistance.
Its high performance makes it a choice for all demanding divers and it will be the natural choice for G250 fans. The left-right hose attachment option makes it ideally suited for tech diving configurations.
The Scubapro MK25 Evo features an air-balanced flow-through piston design provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
Regulator Set includes:
- Scubapro MK25 EVO Piston First Stage
Scubapro G260 Adjustable Second Stage
Scubapro Regulator Hose
SCUBAPRO G260 SECOND STAGE
The Scubapro G260 Regulator is a balanced, adjustable second stage featuring metal components for excellent cold-water resistance (inlet tube, orifice, inhalation control knob, and hose connector).
Nylon fiberglass design features SCUBAPRO's largest second stage casing and diaphragm for the ultimate in breathing sensitivity, regardless of position in the water.
Metal components, including metal air barrel and metal valve inlet tube, increase resistance to freezing when diving in extreme conditions.
Air-balanced valve smoothes out the inhalation effort when diving at varying depths and supply pressures.
High-flow exhaust valve reduces exhalation for better overall breathing comfort.
Diver-adjustable inhalation effort knob fine-tunes air delivery to suit personal tastes.
Venturi-Initiated Vacuum Assist (VIVA) dive/pre-dive switch prevents free flows in cold water or when used as an octopus.
Reversible hose attachment allows you to easily adjust hose routing for tech diving configurations.
Ultra-comfortable orthodontic mouthpiece is easy to grip yet doesn't inhibit airflow.
- Weight: 9.7oz/275g.
- Airflow at 2900psi/200bar: 1800 l/min - 64 SCFM.
- Maximum low pressure: 203psi/14bar.
SCUBAPRO MK25 EVO FIRST STAGE
With the introduction of the new patent-pending Extended Thermal Insulating System (XTIS), the Scubapro MK25 EVO first stage lets you enjoy an ultra-fast breathing response, instant delivery of air on demand, great sensitivity and extra-high airflow - regardless of how cold the water is.
The XTIS makes this possible by fully isolating the mechanical elements of the first stage from the cold, increasing its freezing resistance 30 percent over the old MK25 without compromising breathing performance. This makes the MK25 EVO the ultimate do-it-all first stage for all water temperatures.
Air-balanced flow-through piston design provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
Patent-pending XTIS (Extended Thermal Insulating System) fully isolates the mechanical elements from the cold, increasing freezing resistance 30 percent over the current MK25 without compromising breathing performance.
New spring insulating coating, body insulating bushing (non-metal cylindrical interface separating metal parts from water), anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance. (Key insulation system components are visible in blue.)
Anti-freeze protection radically increases breathing reliability when diving in the most extreme water temperatures.
Two high pressure and five high-flow low pressure ports on a swivel turret maximize hose routing options.
External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
- 300bar DIN connection.
- Weight: DIN 300 572g
- Airflow at 2900psi (l/min/SCFM): >8500/301.
- Intermediate pressure 9-9.8 bar.
|*Most of our divers prefer DIN fitting on the 1st stage regulator which attaches to the tank valve. A DIN regulator has a threaded post which screws into the inside of a DIN valve tank and has no additional metal or braces that run behind the valve. This, together with the position of its o-ring, creates a more secure seal on the tank. YOKE (or A-Clamp) 1st stages have an oblong metal brace that completely encircles the tank valve when in place and is screwed down on the tank valve when the yoke screw is tightened. Both regulators seal to the scuba tank by means of an o-ring where the o-ring on a Yoke valve is in the tank valve itself as opposed to DIN regulators that have the own o-ring. DIN fittings are commonly accepted as being more secure but Yoke valves are common throughout North America and recreational tourist destinations. A DIN regulator can be adapted to Yoke valves by using an A-clamp adapter for travel.|
We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.
Our 2022 shipping rates are as follows:
• UK mainland orders £45 and over: FREE - DPD Delivery
• UK mainland orders under £45: £4.90 Fixed Rate - DPD Delivery
• Channel Islands, Isle of Man, Highlands & Northern Ireland: £14.9 Fixed Rate
• European Union: £13.90 + 5% of order value (maximum £30)
• Rest of the World: £19.50 + 8% of order value (maximum £55)
• BFPO Post Codes: £20
For international orders containing weights, cylinders (excluding suit inflation bottles) and Suex scooters please contact us in advance before placing your order.
These products are not included in our global max-capped shipping rates and are only shipped outside of UK mainland after freight cost is calculated based on total weight, dimensions of parcel, location of delivery and the courier service used. We will let you know what this cost will be before processing any order.
All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.
RETURNS & REFUNDS
Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.
Email us at email@example.com or call us on +44(0)1305 824 555
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The
goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges) may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Dorset, DT5 1FD