Scubapro MK25 EVO A700 Carbon Black Tech
The premium Scubapro MK25 EVO A700 Carbon Black Tech Regulator is not only the best-breathing reg in Scubapro’s line but also the leader in advanced design and materials.
DIN or A-Clamp?
Special Order
The premium Scubapro MK25 EVO A700 Carbon Black Tech regulator is not only the best-breathing reg in Scubapro’s line but also the leader in advanced design and materials.
Scubapro MK25 EVO A700 Carbon Black Tech is a race car sleek, battle tank tough
Like the original A700 second stage, the A700 Carbon's casing is full metal to take advantage of the extremely high heat exchange rate, making this second stage a great choice for cold-water diving.
However, the screw-down front cover, in place of metal, is hand-made out of carbon fiber - the same material you find on aircraft and high-speed race cars. Carbon fiber is extremely lightweight and, unlike metal which can change shape when dropped or struck against a hard object, carbon fiber can resist substantial shocks without damage.
Performance-wise, the A700 Carbon retains the same muscular performance as the all-metal A700. Its air-balanced valve technology and oversized exhaust valve work with a well-designed sectional exhaust tee, a first-rate purge and responsive user controls to create a tech-tough breather with effortless inhalation and an ease of exhalation that is unmatched. It's now just lighter and tougher.
The A700 Carbon is teamed with the MK25 EVO, widely considered the gold standard in first stage performance. This air-balanced flow-through piston design delivers consistent and effortless airflow, regardless of depth, tank pressure, or breathing rate. With its ultra-freeze-resistant Extended Thermal Insulating System (XTIS) the MK25 EVO offers excellent thermal insulation by fully isolating the mechanical elements of the first stage from the cold, all without compromising breathing performance.
Finishing off this premium air delivery system is a DLC (Diamond-Like Carbon) Black Tech coating applied to the first and second stages. This unique coating not only lends a sleek technical look to the system, its scratch- and corrosion-resistant properties perform an important function in protecting the reg against the strains and stresses of technical diving and the ravages of the saltwater environment.
Put it all together, and you have the Scubapro MK25 EVO A700 Carbon Black Tech Regulator, diving's ultimate muscle reg, built with high-tech materials and sporting race-car-sleek styling. It looks great, is ultra-durable, and delivers the best breathing performance around.
MK25 EVO A700 Carbon Black Tech Regulator includes
- Scubapro A700 Carbon Black Tech second stage
- Scubapro MK25 EVO Carbon Black Tech second stage
- Scubapro High-flow regulator hose
A700 Carbon Black Tech 2nd stage
Hand-made carbon fiber front cover, metal casing and metal valve housing (barrel) make for a rugged second stage able to withstand years of aggressive diving.
Carbon fiber is virtually bulletproof and also extremely lightweight. The A700 Carbon's cover weighs only 10 grams, compared to the 42-gram weight of the original A700's metal cover, resulting in more comfortable diving.
DLC Black Tech coating protects from corrosion and scratches and lends a technical look to the regulator.
Special Torx cover screws are able to support a higher tightening torque without damage.
Metal case construction enables the use of a larger diaphragm inside a compact casing, increasing breathing sensitivity.
Air-balancing smoothes out the inhalation effort when diving at varying depths and supply pressures.
User controls include a diver-adjustable inhalation effort knob and coaxial Venturi-Initiated Vacuum Assist (VIVA) switch.
Super-flow hose features an oversized bore that allows more air to flow on each inhalation.
Ultra-comfortable orthodontic mouthpiece is easy to grip yet doesn't inhibit airflow.
- Weight (without mouthpiece): 8.0oz/228g
- Airflow at 2900psi/200bar: 2000 l/ min - 71 SCFM
MK25 EVO Carbon Black Tech 1st stage
Air balanced flow-through piston in a Black Tech-coated brass body provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
DLC Black Tech coating protects from corrosion and scratches and lends a technical look to the regulator.
Patented XTIS (Extended thermal Insulating system) fully insulates the inner mechanism from the environment, improving cold-water resistance by 30% and delaying ice formation in extreme cold-water conditions without compromising breathing performance. Key insulation system components are visible in blue.
New spring insulating coating, body insulating bushing, anti-freeze cap, bigger body and cap thread all work in concert with the XTIS to improve cold-water performance.
Anti-freeze protection radically increases breathing reliability when diving in the most extreme water temperatures.
Two opposing high pressure ports allow the first stage to be positioned either up or down.
Five high-flow low pressure ports on a swivel turret maximize hose routing options.
External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
DIN version comes with a new dual-compound wheel that features a new ergo shape and soft grip on a rugged black nylon frame.- Weight: INT 232 790g; DIN 300 570g
- Airflow at 2900psi/200bar: (l/min/ SCFM): >8500/301
- Intermediate pressure (psi/bar): 133-142/9.2-9.8
DIN or A-clamp first stage?
Most of our divers prefer DIN fitting on the 1st stage regulator. A DIN regulator has a threaded post which screws into the inside of a DIN tank valve and has no additional metal or braces that run behind the valve. This, together with the position of its o-ring, creates a more secure seal on the tank.
YOKE (or A-Clamp) 1st stages have an oblong metal brace that completely encircles the tank valve when in place and is screwed down on the tank valve when the yoke screw is tightened.
Both regulators seal to the scuba tank through an o-ring where the o-ring on a Yoke valve is in the tank valve itself as opposed to DIN regulators with their own o-ring.
DIN fittings are commonly accepted as more secure, but Yoke valves are common throughout North America and recreational tourist destinations. A DIN regulator can be adapted to Yoke valves by using an A-clamp adapter for travel.
SHIPPING:
We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.
Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information on delivery terms and returns.
Our current shipping rates are as follows:
• UK mainland orders £45 and over: FREE
• UK mainland orders under £45: £4.90 Fixed Rate
• Channel Islands, Isle of Man & Highlands: £9.90 Fixed Rate
• Northern Ireland: £14.9 Fixed Rate
• European Union: £13.90 + 5% of order value (maximum £30)
• Rest of the World: £19.50 + 8% of order value (maximum £55)
• BFPO Post Codes: £20
INTERNATIONAL EXCEPTIONS:
For international orders containing weights, cylinders (excluding suit inflation bottles) and Suex scooters please contact us in advance before placing your order.
These products are not included in our global max-capped shipping rates and are only shipped outside of UK mainland after freight cost is calculated based on total weight, dimensions of parcel, location of delivery and the courier service used. We will let you know what this cost will be before processing any order.
All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.
RETURNS & REFUNDS
We offer a 30 day return for any product sold under our Returns & Refunds Policy Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.
Email us at sales@dirdirect.com or call us on +44(0)1305 824 555
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges i.e. Free shipping for orders £45 and above) the UK shipping rate may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Mereside, Portland
Dorset, DT5 1FD
United Kingdom
Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information.