Scubapro MK17 EVO C370 Regulator
The Scubapro C370 MK17 EVO diving regulator set combines premium first stage with an air-balanced second stage. With the C370 in your dive bag you’ll be ready to dive everywhere. Together with environmentally sealed MK17 first stage, you have a regulator set that will reliably perform in all conditions.
Dispatched in 1 to 2 days
Scubapro's air-balanced C370 is compact and light case provides top performance and bulletproof reliability. With the C370 in your dive bag you’ll be ready to dive everywhere.
Marry it up with environmentally sealed MK17 Evo first stage, you have a regulator set that will reliably perform in all conditions.
The MK17 Evo is completely sealed off from the elements, ensuring trouble-free operation no matter how cold or murky the water gets. It is more compact yet delivers better breathing performance than its predecessor. Its improved internal design allows more airflow from the LP ports which have been reconfigured for better hose routing.
The C370 brings forth the best features of its predecessor, the C350, while adding a balanced valve to its design. Its new exhaust tee, based on the S620 Ti’s design, contributes to a 10% improvement in work of breathing over the C350. It’s a smart reg system for all kinds of diving applications.
C370 2ND STAGE
The Scubapro air-balanced C370 regulator brings forth the best features of its predecessor, the C350, while adding a balanced valve to its design. Its new exhaust tee, based on the S620Ti's design, contributes to a 10% improvement in work of breathing over the C350.
Air-balanced valve smoothes out the inhalation effort at varying depths and supply pressures.
Compact rugged fiberglass reinforced nylon casing and new exhaust tee take up little space in a dive bag. Stainless steel frame on the front cover adds the SCUBAPRO C-Series signature.
A new poppet and lever allows the design to maintain the same overall size as the C350. A new exhaust tee based on the S620 Ti's design contributes to better work of breathing (a 10% improvement over the C350)
User controls include a diver-adjustable inhalation effort knob and Venturi-Initiated Vacuum Assist (VIVA). Large purge button is easy to activate, even wearing thick gloves.
Compact Hi-Flow mouthpiece improves airflow as well as mouth comfort, fitting all mouth sizes, from smaller to largest
- Weight: 171g.
- Airflow at 200bar: 1600 l/min
MK17 EVO 1ST STAGE
The Scubapro MK17 EVO is Scubapro's premium high performance balanced diaphragm first stage. Engineered specifically for cold water and harsh environments, its internal components are completely sealed off from the elements so neither water nor pollution can get inside the chrome-plated marine grade brass body to foul the mechanism.
Air balanced diaphragm delivers constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
Environmentally sealed system prevents water and pollutants from fouling the inner mechanism.
More compact design features a smaller dry ambient pressure chamber and spring, although the bulletproof inner parts remain the same.
Dry ambient pressure chamber increases freezing resistance, ensuring consistent airflow in the coldest conditions.
- Substantial increase in airflow -- 6900 l/min versus 6500 l/min -- includes improved balance of air supply pressure.
- Two high pressure and four high-flow ports maximize air delivery and hose routing options.
- High-flow performance is available from all four LP ports which are configured for optimum hose routing.
- Weight: INT 232 - 850g.
- Airflow at 200bar: 6900 l/ min - 230 SCFM.
- Intermediate pressure (bar): 9.0-9.8.
|*Most divers prefer 300 Bar DIN fitting on the 1st stage regulator which attaches to the tank valve. A DIN regulator has a threaded post which screws into the inside of a DIN valve tank and has no additional metal or braces that run behind the valve. This, together with the position of its o-ring, creates a more secure seal on the tank. YOKE (or A-Clamp) 1st stages have an oblong metal brace that completely encircles the tank valve when in place and is screwed down on the tank valve when the yoke screw is tightened. Both regulators seal to the scuba tank by means of an o-ring where the o-ring on a Yoke valve is in the tank valve itself as opposed to DIN regulators that have the own o-ring. DIN fittings are commonly accepted as being more secure but Yoke valves are common throughout North America and recreational tourist destinations. A DIN regulator can be adapted to Yoke valves by using the light-weight Scubapro A-clamp adapter for travel or a cheaper DIN to Yoke adapter.|
We aim to dispatch items within the Dispatched Time indicated but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to manufacturing and/or transport delays caused by global or regional shortages.
Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund.
Email us at email@example.com or call us on +44(0)1305 824 555
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges) may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Dorset, DT5 1FD