Hollis ST 22 Elite Travel Wing System

Like the Hollis ST Travel, the Hollis ST 22 Elite Travel Wing System with an aluminium backplate is an excellent choice for warm water diving and travelling. This single tank wing system comes pre-assembled from the factory.

However, instead of the Hollis Solo Harness, the Hollis ST Elite comes with a luxurious and adjustable Elite 2 Harness, yielding a result similar to what you’d expect from a full-featured BCD.

So if you’re from the recreational world of single tank diving using a traditional BCD, this gives you that same harness style but on a backplate for added stability.

The ST Elite System also gives you many options to customise depending on your diving style if it changes over time.

Hollis ST 22 Elite Travel Wing System includes

• Hollis ST 22 Wing with LP Hose
• Elite 2 Harness with Aluminium Backplate 2.0
• Backplate Backpad 2.0
• Two Cambands with Plastic Buckles

Hollis ST 22 Wing

An ultra-streamlined single-tank Hollis ST 22 Wing rounds out the Hollis ST 22 Elite Travel Wing System with a perfect horizontal trim and surface floatation.

The design of the Hollis ST Wing for single-cylinder diving features a 360-degree tapered profile. This increases lift towards the hips, promoting better horizontal trim in the dive position while allowing perfect surface floatation.

Tank slots and tank cradle are included, allowing you to connect your wing and backplate without needing a single tank adapter plate. This reduces weight and unnecessary accessories while travelling.

The lower OPV is easy to reach for venting gas while horizontal or heads down, and the inflator design is a K style with a rugged crushproof rubber hose for easy positioning and oral inflation should you need to.

• Lift capacity: 22lbs/10kg
• Welded flange and one-piece retainer for servicing without the need for tools
• HD Laminated 1680D Cordura outer shell
• 420 nylon internal bladder
• Elbow offset to avoid tank valve or regulator interference
• Lower left pull relief valve
• Cam band slots & tank cradle built-in

Hollis Aluminium Backplate 2.0 with Elite 2 Harness

The Hollis Aluminium Backplate 2.0 with the Hollis Elite 2 Harness offers all the features of a technical harness with the added comfort that recreational divers seek.

Adjustable shoulder straps with quick-release buckles provide easier donning and doffing of equipment. Adjustable and removable shoulder pads w/ 3 adjustable stainless steel bent D-rings on each side.

The backplate features improved ergonomics for a more comfortable fit but is still short enough to fit smaller frame divers. It is laser cut and CNC bent, which gives this awesome new appearance.

HARNESS

• 316 marine grade stainless steel used for all hardware waist buckle
• Adjustable sternum strap included allows for a custom fit
• Harness weight: 770g

BACKPLATE

• EN AW 6061 Aluminum, Thickness 3mm
• Hard Anodized, Black Marine Grade
• Improved Ergonomics Comfortable Fit
• Weight 680g / Size 29.5cmx42cm

SHIPPING:

We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.

Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information on delivery terms and returns.

Our current shipping rates are as follows:

• UK mainland orders £45 and over: FREE
• UK mainland orders under £45: £4.90 Fixed Rate
• Channel Islands, Isle of Man & Highlands: £9.90 Fixed Rate
• Northern Ireland: £14.9 Fixed Rate
• European Union: £13.90 + 5% of order value (maximum £30)
• Rest of the World: £19.50 + 8% of order value (maximum £55)
• BFPO Post Codes: £20

INTERNATIONAL EXCEPTIONS:

For international orders containing weights, cylinders (excluding suit inflation bottles) and Suex scooters please contact us in advance before placing your order.

These products are not included in our global max-capped shipping rates and are only shipped outside of UK mainland after freight cost is calculated based on total weight, dimensions of parcel, location of delivery and the courier service used. We will let you know what this cost will be before processing any order.

All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.

RETURNS & REFUNDS

We offer a 30 day return for any product sold under our Returns & Refunds Policy Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.

Email us at sales@dirdirect.com or call us on +44(0)1305 824 555

Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival. 

Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges i.e. Free shipping for orders £45 and above) the UK shipping rate may be deducted from any UK mainland refund unless linked to a fault/defect claim. 

Please contact us with your order number and name before sending any returns to:

Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Mereside, Portland
Dorset, DT5 1FD 
United Kingdom

Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information.