DirDirect :: Wing | BCD Systems :: Components & Parts

Technical diving accessories from delrin thumbwheels to cinch harness adaptor plates, adjustable buckle sets to crotch straps, harness webbing, wing and bcd inflators, corrugated hoses, slide release or pinch buckles, complete OPV units, cambands, wing replacement bladders, harness snoopy loops, bolt kits, inflator elbows and weight belt buckles.

Components & Parts


Apeks Single Tank Adapter Plate

The Apeks stainless steel single tank adapter plate comes with two sets of bolts, pair or washers and wing nuts.


Halcyon Single Tank Adapter

The stainless steel Halcyon Single Tank Adapter allows divers to secure single tank wing and backplate to a single cylinder. Includes cam bands with stainless steel buckles.


Halcyon Weighted Single Tank Adapter

Halcyon Weighted Single Tank Adapter is for divers who want to remove unnecessary weight from their waist to enjoy greater comfort and better in-water position. 6lbs weighted.


OMS Single Tank Adapter

OMS Single Tank Adapter with stainless steel plate, two cylinder straps, non-slip friction pads, plastic buckles, bolts and wing nuts.


OMS Single Tank Adapter Plate

The stainless steel OMS Single Tank Adapter Plate without cambands.


Dive Rite Corrugated Hose

The traditional type corrugated hoses from Dive Rite. In 3 lengths. Fit most dive wings and BCDs.


Halcyon Corrugated Hose

Replacement 12" corrugated BC inflator hose with standard fitting.


Halcyon Crotch Strap

Adjustable 2" Halcyon crotch strap with front and rear D-rings for Halcyon diving backplates but will fit any backplate with a 2 inch webbing slot for crotch strap.


Halcyon Deluxe Harness Pads

The complete set of Halcyon Deluxe Harness Pads includes shoulder pads and a backplate pad for the ultimate comfort while diving in thinner exposure suits. The backplate pad has a storage pocket allowing the diver to carry a surface marker or lift bag.


Halcyon Harness Webbing

Halcyon's own webbing has enough rigidity to make a comfortable fit for the diver, whether male or female and is affordable enough to allow for regular maintanence and replacement of old webbings.

H Colour

Halcyon Harness Webbing Kit

The Halcyon Harness Webbing Kit includes all stainless steel hardware, crotch strap and webbing to build a complete single loop harness with any backplate.


Halcyon Inflator

Standard replacement inflator for Halcyon wings. Fits all corrugated hoses with a diameter of 2.5cm.


Halcyon Inflator Elbow

Replacement  inflator elbow for buoyancy compensators and Halcyon wings. Fits all wings and corrugated hoses which have a standard fitting.


Halcyon Inflator Retainer O-ring

Halcyon inflator retainer O-ring to keep wing inflator unit next to the left hand shoulder d-ring.


Halcyon MC Storage Pak

The special Halcyonl MC Storage Pak mounts between the diver's back and the Halcyon backplate, attached to the backplate on all sides and is used to store lift bags and SMBs.


Halcyon MC Storage Pak Bolt Kit

A full replacement stainless steel bolt kit for the Halcyon MC Storage Pak and Deluxe Pads used on Halcyon wings. Set of 8.


Halcyon Octogrip Pad

Protect your tank finish! This OctoGrip replacement pad was developed by Halcyon for use with their single tank adapters to protect the tank from the stainless steel buckle digging in.


Halcyon Octogrip Strap

Halcyon Single Tank Octogrip strap replacement with stainless super cam buckle.


Halcyon Over-Pressure Dump Valve

Replacement over-pressure dump valve for diving wings, BCDs and lift devices.


Halcyon Single Tank Adapter Bolt Kit

Replacement bolt kit for Halcyon Single Tank Adapter. Imperial.


Halcyon Single Tank Adapter Weight

The Halcyon Single Tank Adaptor Weight fits inside the Halcyon convertible Single Tank Adapter. Weight: 2.7kg/6lbs.


Halcyon Wing Replacement Inner Bladder

Replacement inner bladder for Halcyon Eclipse and Evolve wings.

Type & Size

Harness Snoopy Loop

Replacement rubber snoopy loop for harness.


Hollis Cam Band

Heavy duty webbing Hollis Cam Band with delrin clamp.


IST Dolphin Tech Crotch Strap

With its soft, standard 5cm/2" wide webbing this crotch strap further secures and stabilises your scuba rig to your torso without causing any discomfort.


IST Single Tank Adapter Plate

Made from strong and corrosion resistant stainless steel, Dolphin Tech single tank adaptor is essential when attaching a scuba cylinder to your wing.


OMS Back Pad with Bolt Kit

The OMS backplate pad can be easily installed on the OMS backplates to create an additional layer of comfort. The pad also offers a unique accessory pocket accessed along the bottom of the pad that can be used for lift bag or SMB storage.


OMS Back Pad with Integrated Trim Weight Pockets

The new OMS Back Pad with intergrated Trim Pockets simply slips over the backplate without any screws. The four Trim Pockets can hold upto 1.5kg of weight each.


OMS Camband

The OMS Cam Band with plastic buckle includes OMS Friction Pad. The 2" webbing is 36" in length.


OMS Crotch Strap

The OMS Crotch Strap with two stainless steel d-rings and tri-glides is compatible with all backplates with 2" slot.


OMS Friction Pad

The OMS Friction Pad can be used with any 50mm wide camband straps to provide additional grip.


OMS Silicone Retraction Bands

OMS Silicone Retraction Bands, for use with the OMS Deep Ocean, Trieste and Tesseract wings. Set includes 12 33cm bands made from durable elastomeric silicone rubber tubing and are easy to tie and easy to install on your air cell.


OMS SmartStream Quick Adjust Assembly

The OMS SmartStream Quick Adjust Assembly allows a continuous loop, one piece harness to be used as an adjustable one which will fit most harnesses and work with any 2 inch wide webbing. By pulling the waist straps forward, the shoulder straps secure to the diver’s shoulders and back - allowing proper adjustments to be instantly achieved.

SS or Ali Hardware

OMS Webbing Replacement

OMS Harness Webbing Replacement with a centre grommet can be used as replacement for any single 2" loop harness.


Slide Release Buckle

Plastic pinch clip can be used as an "inline clip" on continuous loop harness systems, mounted under the shoulder D-ring for easy donning and doffing of wings in adverse surface conditions and/or diving off RIBs.


XDeep 3D Mesh Pads

The XDeep 3D Mesh Shoulder and Back Pads add extra comfort to your XDeep wing system. The pads are neutrally buoyant and won't compress at depth.

Choose Pads

XDeep Complete OPV

Complete replacement XDeep overpressure dump valve for wings.


XDeep Harness O-ring

The XDeep Harness O-ring is a robust fflexible O-ring made to fit any 2 inch webbing and can be used as a fixed or adjustable D-Ring avoiding metal connections.


XDeep Inflator

The XDeep Power Inflator is a popular design K-Valve used by most divers because of it's ease of use and outstanding performance in all temperatures. Fits corrugated hose diameter 2.5cm.


Dive Rite Crotch Strap

2" Dive Rite Crotch Strap with scooter ring. Includes a neoprene sleeve to protect exposure suit from abrasion.


DirZone Adjustable Buckle Set

DirZone adjustable Stainless Steel Belt Buckle Set ( 1 Set )


DirZone Harness Webbing

Standard 2 inch width 4 metres length stiff replacement webbing for a backplate system with a grommet in the centre.


DirZone Inflator Service Kit

The Dirzone inlator service kit is suitable for all Dir Zone inflators.


Cinch Weight Pocket Adapters

A pair of Halcyon Cinch Weight Pocket Adapters to secure the Halcyon ACB integrated weight pockets to Halcyon Cinch Harness.


Delrin Thumbwheels

The Delrin Thumbwheels are designed as an option instead of the traditional metal wing nuts. The unique 3 point system gives you better grip when handling with gloves or in cold water. Metric.


Dive Rite Low Profile Cam Strap

Dive Rite's 1.5" wide and 36" long low profile cam strap is light weight, low profile and comes with a non-slip pad to protect tanks from scratches. The marine-grade, stainless steel buckle is also strong, yet lightweight.


Halcyon Cinch Adaptor Plate

A specially designed riser creates a slick surface that allows your webbing to slide freely when needed but to remain secure while standing up with tanks on your back.


Halcyon Cinch Bolt Extender

The Halcyon Cinch Quick-adjust system may be used with a single or double tank configuration. The Halcyon bolt extender allows divers to extend a short lower bolt where necessary.

Imperial or Metric

Halcyon Cinch Bolt Kit

Spare bolt kit for the Halcyon Cinch Harness System. Comprised of four (two 1/4 - 20 by 3/8, two 1/4 - 20 by 5/8) SS bolts with weldmate nuts.


Halcyon Cinch Complete Light Retainer

The replacement Halcyon Cinch Light Retainer assembly consists of two pieces and enables easy adjustability of the diver’s harness while wearing a hip mounted primary light.


Halcyon Cinch D-Ring Assembly

The Cinch D-ring assembly attaches to the Halcyon Cinch plate and is fully adjustable, allowing the diver to select an optimal position for the D-ring.


Halcyon Cinch Light Retainer Buckle

Replacement light retainer buckle for Halcyon Cinch Harness.


Halcyon Cinch Quick Adjust Crotch Strap

The Halcyon Quick-adjust crotch strap is webbed with an adjustable buckle that allows rapid resizing while eliminating any dangling webbing.


Gift certificates

We use cookies to give you a better experience and understand how the site is used. By continuing to use this site, you consent to this policy. You can change your preferences any time. Click to learn more.