;
DirDirect :: Undersuits & Heating Systems :: Heating Systems :: Santi Heated Vest Flex 2.0

Santi Heated Vest Flex 2.0

Santi Heated Vest Flex 2.0
SANTI Heating Vest Flex 2.0 SANTI Heating Vest Flex 2.0

The Santi Heated Vest Flex 2.0 is a product for those who seek the highest level of comfort during long and cold dives. Introduced in January 2020, the new Flex 2.0 heating vest, has been designed as part of the Santi heating system which currently consists of such items as the Santi Heated Undersuit and original Heated Vest, drysuit connector or thermovalve and external battery. The vest was designed to provide the highest functionality and safety. Thanks to fabrics used, the vest provides thermal comfort even after your battery is drained.

Details
SKU SHVF2
Options
Size
£235.00

Santi Heated Vest Flex 2.0The Santi Heated Vest Flex 2.0 is a product for those who seek the highest level of comfort during long and cold dives.

Introduced in January 2020, the new Flex 2.0 heating vest, has been designed as part of the Santi heating system which currently consists of such items as the Santi Heated Undersuit and original Heated Vest, drysuit connector or thermovalve and external battery. The vest was designed to provide the highest functionality and safety. Thanks to fabrics used, the vest provides thermal comfort even after your battery is drained.


Made of very flexible Climashield insulation fabric with weight of 180g/m2 it consists of three layers – breathable Climashield Contour insulation covered with two protective layers made of polyester from the inside and outside.

The external layer has also windproof properties.

The newest version of Santi heating vest, thanks to new, non-quilted fabric quality provides more warmth towards the body. It generates better thermal properties and keeps the heat trapped closer to the body for longer.

Available sizes:

XS, S, M, L, XL, 2XL, 3XL

 

  • Climashield Contour fabric – stretchable threads properties,  resistant to wear and tear
  • Weight 180g/m2, isolation: 0.96 CLO
  • Side and crotch adjustable, rubber bands to allow best circumference and length adjustment
  • Handy pocket for power cord
  • P-valve hose opening
  • Maximum heating temperature: 45ºC
  • Maximum heating power: 55W
  • Battery running time: Santi 6Ah Battery: 1h30min of heating, Santi 24Ah battery: 5-6h of heating
  • Safety switch preventing from overheating and too strong current
  • New generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking
  • Innovative, synthetic power cable resistant to high temperatures and cuts, hidden in a handy pocket
  • Ergonomic nesting and wires layout inside
  • Special vest bag included
  • Batteries and connectors must be purchased separately
  • Use with appropriate battery source only and never over 12V !

Santi Vest Size Chart

ATTENTION!
Works only with SANTI Drysuit Connector and SANTI Thermovalve.

 

To operate the Santi Heating Vest Flex 2.0 the following can be purchased separately:

Santi Drysuit ConnectorSanti Drysuit ThermoConnector - Uses existing drysuit inlet valve

Santi Drysuit Connector connects your Santi Heated Vest, Gloves or Undersuit to the battery using your existing drysuit inflation valve (Apeks or SiTech).

E/O cord connector passes through a standard suit inflation valve and provides power connection from the external battery to a heated product under the drysuit.

  • Works with power supply no higher than 12V
  • Total length of the cables including 55cm
  • Height without the valve - 19 mm
  • Available with "Apeks” or "Si-Tech" srew size
  • CE certified

Once your Sitech or Apeks drysuit inflator valve is removed, the SANTI Drysuit Connector is placed and secured in the drysuit valve hole. The cables run through the connector. The existing drysuit valve is then screwed on top of the connector. Select which (Sitech or Apeks) valve you currently have under options as the diameter will be different.

Santi ThermovalveSanti Thermovalve - All in one

he Santi Thermovalve connects Santi Heated Vest, Gloves or Undersuit to a external battery. It replaces the standard inflation valve. Unlike the Santi Drysuit Connector, it offers two functions in one device: drysuit inflation valve with an integrated connector for Santi heating systems.

The 90° moveable valve head provides convenient hose attachment which allows for optimal E/O cord and pressure hose settlement under the drysuit.

  • Includes E/O Blind Plug
  • Works with power supply no higher than 12V
  • Total length of the cables 55cm
  • Ergonomic design
  • Available with "Apeks” or "Si-Tech" srew size
  • CE certified

Dry suit inflator valves are user replaceable. Your current valve (Apeks or SiTech) will need to be removed. Basically it will have to be screwed out. Once the dry suit valve hole is apparent, it is advisable to clean the area on both sides before installing the new Thermovalve in its place. Screw the valve in and tighten - you're ready to go!

: *
: *
: *
Type the characters you see in the picture:

test

*
Gift certificates

 
We use cookies to give you a better experience and understand how the site is used. By continuing to use this site, you consent to this policy. You can change your preferences any time. Click to learn more.