Atomic SV2 Flex Semi-Dry Snorkel
Atomic Sv2 Semi Dry Snorkel is perfect for use in choppy sea. Horizontal vents engineered to diffuse splashed water that would normally freely enter the snorkel top.
Dispatched in 5 to 7 days
Atomic Aquatics SV Series Snorkels
It was finally time to reinvent the snorkel
Atomic Aquatics only designs and releases new products that we truly believe redefine a category and solve a diver need. Did something as simple as the snorkel really require new thinking? Well...yes.
More and more divers were choosing to enter the water without a snorkel because the size, unwieldiness and poor performance just wasn’t worth the hassle. Yet, the use of a snorkel during a dive can help you save precious air while hanging on the anchor line waiting to descend. There are numerous situations where a dependable, high-performance snorkel is a valuable dive tool. The new Atomic Aquatics SV Series truly redefines how a snorkel works and helps divers extend their adventure.
High perfomance design with a semi-dry top is perfect for use in choppy seas.
The SV2 semi-dry top employs horizontal vents engineered to diffuse splashed water that would normally freely enter the snorkel top. The small gaps between the vanes of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents without entering the breathing tube.
SV: Scupper Valve
The Atomic Aquatics Scupper Valve snorkel design is based on the same principle as the one-way Scupper Valve used in boats. If waves or splashes enter the boat, a one-way rubber flapper located on the deck near the rear of the boat opens to drain the water then quickly closes to prevent backwash. The simple Scupper Valve effectively keeps the deck free of water accumulation.
SV: Small & Versatile
Before embarking on a new design, we asked divers about the snorkels that were currently on the market. Overwhelmingly, the biggest complaint about snorkels was size. The modern Scuba snorkel had evolved into a large and difficult to manage piece of equipment. Divers were abandoning the use of their snorkels because of size, discomfort and poor performance. So Atomic Aquatics imagined a smaller, streamlined snorkel design that clears easily and is comfortable to use.
SV: Sleek & Valuable
At Atomic Aquatics, we always strive to achieve sleek and stunning designs that are as attractive as they are functional. The SV Snorkel Series is no exception. Its sleek profile makes it easy to stow or strap as a valuable addition to your dive bag. Atomic divers will WANT to take the SV Snorkel to preserve tank PSI or paddle around an exotic lagoon between dives.
SV2 Flex: High-Performance Design with a Semi-Dry Top
The SV2 includes a Scupper Valve lower section with a sleek semi-dry top. The SV2 semi-dry top employs horizontal vents engineered to diffuse splashed water that would normally freely enter the snorkel top. The small gaps between the vanes of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents without entering the breathing tube. The end result is less water in your snorkel. The SV2 is perfect for rough or choppy water conditions.
SV2 with Semi-Dry Top
Perfect for use in choppy waves
The SV2 combines the same Scupper Valve lower section with the sleek and effective SV2 Semi-Dry top. The SV2 Semi-Dry top horizontal vents (1) are engineered to diffuse splashed water that would normally freely enter the snorkel top. The small gaps between the vanes (2) of the vent restrict water speed and droplet size and permit most of the splashed water to exit the special vents (3) without entering the breathing tube. Thus, you get less water in your snorkel. The SV2 is the perfect answer for rough or choppy water conditions.
SV Series — How they work
Just like the one-way Scupper Valve on a boat, the lower section of both the SV1 and SV2 (semi-dry) enable water to be easily expelled.
Any water entering the top of the snorkel (1) bypasses the mouthpiece completely and exits out the purge valve (4).
If water did enter the internal tube (2) located inside the main snorkel body, it contains a small one-way Scupper flap valve (3) designed to allow water to flow past the mouthpiece and out the purge valve (4) without collecting at the bottom of the breathing passage.
The diver simply exhales a small burst of air to clear any water trapped below the mouthpiece, and the internal tube airway is kept dry. It’s so simple and so effective we have a patent pending!
Features and benefits of the SV Series high performance snorkels
The Scupper Valve (SV) design is self-draining and delivers crisp, effortless clearing. Posi-lock flex retainer secures flex section and mouthpiece. (1) Dual silicone mouthpiece prevents over-clenching of teeth that would restrict air flow. (2) Rotational mouthpiece with ratchet indicators. (3) SV1 has a conical flared top for high performance breathing. SV2 Semi-dry top is designed to limit splashed water from entering the breathing tube.
- The Atomic Aquatics Scupper Valve snorkel design just like the one-way Scupper Valve on a boat, the lower section enable water to be easily expelled.
- The SV1 design has a conical flared top to deliver maximum airflow
- The SV1 is the optimal choice for calm waters or for strong swimming situations
- Even though water may enter the open top, the internal tube airway remains dry
- Any water trapped below the mouthpiece is easily cleared with a small burst of exhaled air
- The flexible lower section drops the mouthpiece out of the way when not in use
- Posi-lock flex retainer secures flex section and mouthpiece
- Dual silicone mouthpiece prevents over-clenching of teeth that would restrict air flow
- Rotational mouthpiece with ratchet indicators
- Quick disconnect snorkel keeper includes 30 degree rotation
- Sliding snorkel keeper range adjuster allows for accurate placement without constant re-adjusting each dive
- This Fantastic snorkel is perfect for calm waters or for strong swimming situations!
SV1 Flex: High-Performance Design with Conical Flared Top
Every snorkel model in the SV Series includes the Scupper Valve on the bottom mouthpiece section. Then, Atomic gives divers a choice of tops to best suit their needs. The SV1 design has a conical flared top to deliver maximum airflow.
The SV1 is the optimal choice for calm waters or for strong swimming situations. Even though water may enter the open top, the internal tube airway remains dry. Any water trapped below the mouthpiece is easily cleared with a small burst of exhaled air. The flexible lower section drops the mouthpiece out of the way when not in use.
We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.
Our 2022 shipping rates are as follows:
• UK mainland orders £45 and over: FREE - DPD Delivery
• UK mainland orders under £45: £4.90 Fixed Rate - DPD Delivery
• Channel Islands, Isle of Man, Highlands & Northern Ireland: £14.9 Fixed Rate
• European Union: £13.90 + 5% of order value (maximum £30)
• Rest of the World: £19.50 + 8% of order value (maximum £55)
• BFPO Post Codes: £20
For international orders containing weights, cylinders (excluding suit inflation bottles) and Suex scooters please contact us in advance before placing your order.
These products are not included in our global max-capped shipping rates and are only shipped outside of UK mainland after freight cost is calculated based on total weight, dimensions of parcel, location of delivery and the courier service used. We will let you know what this cost will be before processing any order.
All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.
RETURNS & REFUNDS
Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.
Email us at firstname.lastname@example.org or call us on +44(0)1305 824 555
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The
goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges) may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Dorset, DT5 1FD