The Ammonite Thermo 24 is specifically designed as a heating system battery that can be used in conjunction with any Ammonite primary light head at the same time.
Ammonite Battery - Thermo Type 24 Accu
The Ammonite THERMO ACCU 24 is specifically designed as a heating system battery that can be used in conjunction with any Ammonite primary light head.
The canister has an LED indicator for battery status and remaining charge as well as an intelligent E/O connector protecting wet connectors from damage. Modern power supply source for heated dive wear Simplicity, intuitive operation and performance reliability; up to 200 Watts heating power. The charging port of ACCU THERMO may be optionally applied to connect any of Ammonite System light heads.
LED Indicator - information on the battery status and charge level. Intelligent E/O - an electronic circuit protecting the contacts of a wet connector from damage. Intelligent E/O - "knows" when the cable is disconnected and when to cut off voltage, as well as when to bring back power supply after reconnecting.
Two-stage power control means effective power management, extending battery life. The magnetic switch position change is easy to feel, even when wearing thick diving gloves. The compact size casing is made of high grade aluminium coated with hard anode while the device is sealed with two o-rings and equipped with a safety valve. Additional Protection and Status Signaling The inner microchip system signals low battery level with a strobe flash and automatically switches to back-up mode (light output at 20% light intensity) when the battery is drained.
SPECIFICATIONS: Capacity Nominal: 23.45 Ah |
Operating at 12V with up to 200W heating power and a 2-stage power control. the accu/battery can be used for heated vest, gloves and undersuit.
Intelligent solutions, advanced functions
Easy switch and effective adjustment
Halcyon Torch Belt Loop
£17.00
E/O Blind Plug
£21.00
Santi Heated Gloves
£198.00
Santi Heated Vest Flex 2.0
£258.00
