Aluminium Luxfer 7L stage cylinder / deco cylinder. O2 clean with 207bar operating pressure. The 'dirty beast' unbrushed aluminium.
Aluminium Luxfer 80cf/11.1L stage cylinder / deco cylinder. O2 clean with 207bar operating pressure. The genuine natural Luxfer Ali 80 - no wonder it's nomme de guerre is 'Dirty Beast'!
Dir Zone Stage Rigging Kit for 80cf, 40cf and 7L aluminium cylinders.
Halcyon Stage Rigging Kit provides a simple but elegant solution for stage/deco bottles. The kit includes everything you need to configure your single cylinder for technical or overhead diving. Available in kits for 40cf, 80cf and 7L aluminium cylinders.
O2 clean 3L white Aluminium 232bar cylinder with mono valve for scuba diving. Out of stock.
Dirty Beast 7L Luxfer ali cylinder. O2 clean with Left or Right hand expandable valve. Suitable for sidemount divers or for those wanting to carry stage cylinders on either side.
Ali cylinder. O2 clean 80cf (11.1L) 207 bar Luxfer cylinder with Left or Right hand expandable valve. Suitable for sidemount divers or for those wanting carry stage cylinders on both sides.
Keep regulator hoses lying flat and avoid kinking. Silicone strips on the inside of the band grip the tank and keep the Dive Rite Deluxe Hose Retainer from rolling.
Dive Rite Hose Retainer is ideal for stage bottles, bailouts or sidemount configurations. This is Dive Rite's superior alternative for keeping those hoses under control.
Replacement 1" Rubber band for aluminum 7L and 80cf or 40cf stage bottles
Mark the contents of your tanks with these handy stickers on a roll. Perforated for ease of use. Contains spaces to mark your initials, date, contents. Includes over 500 stickers per roll.
Metric GUE MOD decals for standard gases. Three-inch black letters on a reflective background ensure high visibility.
One metre of protective cover for jubilee clamps to avoid scratching of cylinders and damage to other equipment by sharp edges of the jubilee bands.
Self adhesive 8cm high letters & numbers ideal for marking cylinders. For diver initials and/or standard gas switch depths. After selecting a letter "continue shopping" to add more until you have exactly what you want.
The Apeks Cylinder Pressure Tester comes with push button vent. DIN fitting. A 360bar HP gauge that can be fitted to a cylinder to check the pressure.
300bar DIN Decanting Hose without gauge for cylinders. Each side has a 300 bar DIN fitting with one end having the spring-operated purge button. Ideal to decant contents of one cylinder to another.
DIN fitting pressure testing gauge with release valve to gauge tank content pressure. Gauge shows content up to 400 bar (5800 psi) with standard 300 bar DIN fitting. Can also be used with optional A-Clamp/Yoke adapter. High quality but light.
Plastic dust cap for DIN cylinder valves. The dust cap comes with a "curly" string and has an o-rin inside of it.
