DirDirect :: Sidemount Diving :: Sidemount Torches

Most of our primary lights for diving can be used for sidemount diving too although placement and cable routing may not always be ideal. Some leading manufacturers specifically produce light canisters with cable outlets at an angle allowing them to be used for sidemount, backmount or rebreather diving.

Sidemount Torches

Products

Light for Me - Sidemount-Backmount Battery Canister

A special design from Light For Me with a 90 degree sidemount port while still addressing the needs of backmount divers. The 4.4 SideMount BackMount Accu has 1 right-angle RCA port for light head attachment and charging while the 6.75Ah and 11.25Ah canisters have 2 ports each - a standard 'straight feed' backmount port and the angled sidemount port making them suitable for every kind of diving. The 90° port can be used for a variety of configurations.

£174.00
Battery Size
Add LFM Light Head

Qty
Light For Me - 4TEC Light Head - Sidemount

Light For Me's most popular 4TEC light head with a longer 53" (134cm) RCA cable for those who need the length. Exposed cable length on this head is 124cm (end to end including connectors 134cm). 



The 4TEC is an ideal torch for "UK-like" diving conditions which may involve inwater particles and possible backscatter. It is a more compact version of the 7XML which uses seven of the same LEDs. The powerful 1200 lumen output of 4 LEDs in the 4TEC is focused into a tight 6° beam and complemented with 2 user selectable power settings (30% and 100%) to conserve battery. 


The 4TEC excels in burn times ranging from 5 to 20+ hours depending on size of battery and power setting.  Just add a canister battery of your choice and you're ready to go!

You can see a comparison of all these torches on our main Light for Me Pages

£283.00
Complete Unit or Lighthead Only

Qty
Light For Me - 7XPE Light Head - Sidemount

TEMPORARILY OUT OF STOCK

Light for Me's best-seller 7XRE light head with a longer 53" (134cm) RCA cable for those who need the length. Exposed cable length in this head is 124cm (end to end 134cm including connectors). The 7XRE design is emphasised by a smaller and lighter light head which is operated by a Piezo switch. The light has two modes 30% and 100% providing 2,200 lumens at over 9000 Kelvin. Just add a canister battery of your choice and you're ready to go! 


You can see a comparison of all these torches on our main Light for Me Pages

£307.00
Complete Unit or Lighthead Only

Qty
Light For Me - NW7 Light Head - Sidemount

Sidemount version of Light For Me's innovative (48W) NW7 (Narrow Wide Seven LED) diving torch with longer, 53" (134cm) RCA cable for those who need the length. The exposed cable length on this head is 124cm (end to end 134cm including connectors). It is identical to the original NW7 head other than in cord length and  combines the leading traits of the most popular 4TEC and 3XML Alexandra umblical light heads into one compact head as a three-in-one unit for serious divers.

Users can select whether to use 4 narrow penetrative beam LEDs as in the 1200 lumen 4TEC or 3 high power wider beam LEDs of the 3600 lumen Alexandra - plus all of the seven beams combined at the same time with a whopping 4800 lumen of output. Just add an LFM canister battery of your choice and you're ready to go! 


Depending on the battery used the NW7 burntime will range from 1 hour to 16 hours. All battery canisters come with protective webbing, belt loop and chargers.

£439.00
Complete Unit or Lighthead Only

Qty
Light For Me - 4TEC Light Head - Dive Light

Small and light with recessed piezo switch. The Light For Me 4TEC is one of our most popular LED canister torches.

4TEC is an ideal torch for "UK-like" diving conditions which may involve inwater particles and possible backscatter. It is a more compact version of the 7XML which uses seven of the same LEDs. The powerful 1200 lumen output of 4 LEDs in the 4Tec is focused into a tight 6° beam and complemented with 2 user selectable power settings (30% and 100%) to conserve battery. 


The 4TEC excels in burn times ranging from 5 to 20+ hours depending on size of battery and power setting. Just add a canister battery of your choice and you're ready to go!

You can see a comparison of all these torches on our main Light for Me Pages

£283.00
Complete Unit or Lighthead Only

Qty
Light For Me - NW7 Light Head - Dive Light

Two of LFM's best selling and strongest torches combined in one compact head to be used individually or together.

LFM’s innovative (48W) NW7 (Narrow Wide Seven LED) diving torch combines the leading traits of the most popular 4 TEC and 3XML Alexandra umbilical light heads into one compact head as a three-in-one adjustable beam unit for serious divers.

Users can select whether to use the 4 XPE narrow penetrative beam LEDs at 1200 lumen of the 4TEC or 3 high power wider beam XML LEDs of the 3600 lumen Alexandra - plus all of the seven beams combined at the same time with a whopping 4800 lumen of output. Just add an LFM canister battery of your choice and you're ready to go!

You can see a comparison of all these torches on our main Light for Me Pages

£439.00
Complete Unit or Lighthead Only

Qty
Light For Me - 3XML Alexandra Light Head - Dive Light

The ultra-bright yet compact and light 3XML Alexandra head is made from anodised aluminium and is equipped with a piezo switch controlling  3 modes of light at a  colour temperature of 6800K (10%, 50% and 100%). Full power provides 3600 lumen at it's fixed beam angle of 13°. 


The  light head comes with a goodman handle and a 110cm cord with RCA/Male connector to be used on LFM canister batteries. A stainless steel gland with spring at light head prevents excessive stress on the cord. Alexandra is bright and wide!

You can see a comparison of all these torches on our main Light for Me Pages

£217.00
save 20%
Complete Unit or Lighthead Only

Qty
Light For Me - 7XML Light Head - Dive Light

OUT OF STOCK.

LFM's most powerful light head. The 7XML looks identical to the LFM 7XPE but with seven XMLII diodes and a total output of 7800 lumen through special optics leading the way as the most powerful torch in the Light for Me range. It's cold colour light perfectly penetrates water with run times starting at 1h 50m (11.25 Amp accu) - up to 3.5h (22 Amp accu) depending on battery used. This new design light head is lightweight and with a recessed piezo switch - without any rotary elements.

£382.00
Complete Unit or Lighthead Only

Qty
Light For Me - 7XPE Light Head - Dive Light

TEMPORARILY OUT OF STOCK

The 7XPE lighthead is a new version of the Light For Me best-seller power horse 7XRE. The new design is emphasised by a smaller and lighter light head which is operated by a Piezo switch. The light has two modes 30% and 100% providing 2,200 lumens at over 9000 Kelvin. Just add a canister battery of your choice and you're ready to go!

You can see a comparison of all these torches on our main Light for Me Pages

£307.00
Complete Unit or Lighthead Only

Qty
Light For Me - 4TEC Light Head with e/o Cord

The E/O cord version of Light For Me's 4TEC  diving torch allows the head and battery source to be connected and/or disconnected via the cord itself. It is identical to the original 4TEC with RCA connection other than the cord. The 4TEC is an ideal torch for "UK-like" diving conditions which may involve inwater particles and possible backscatter. It is a more compact version of the 7XML which uses seven of the same LEDs. The powerful 1200 lumen output of 4 LEDs in the 4TEC is focused into a tight 6° beam and complemented with 2 user selectable power settings (30% and 100%) to conserve battery. 


The 4TEC excels in burn times ranging from 5 to 20+ hours depending on size of battery and power setting.

£248.00
Add LFM RCA e/o Cable

Qty
Light For Me - 7XPE Light Head with e/o Cord

A new model of a well-known torch, sold as a separate head. Can be powered by a compatible battery made by any company using the E/O system in the range of 10 - 20 voltage. Available also with the optional Light For Me Battery and Canister with E/O cord for divers who want to change between light heads or use their canister power for in-water heating through a Heated Vest with an E/O cord inlet.

£297.00
Add LFM RCA e/o Cable

Qty
Light For Me - NW7 Light Head with e/o Cord

The E/O cord version of Light For Me's innovative NW7 (Narrow Wide Seven LED) diving torch allows the head and battery source to be connected and/or disconnected via the cord itself. It is identical to the original NW7 head other than in cord, and combines the leading traits of the most popular 4TEC and 3XML Alexandra umblical light heads into one compact head as a three-in-one unit for serious divers.

Users can select whether to use 4 narrow penetrative beam LEDs as in the 1200 lumen 4TEC or 3 high power wider beam LEDs of the 3600 lumen Alexandra - plus all of the seven beams combined at the same time with a whopping 4800 lumen of output.

Depending on the battery used the NW7 burntime will range from 1 hour to 16 hours.

£444.00
Add LFM RCA e/o Cable

Qty
Gift certificates

 
We have updated our cookie policy to reflect changes in the law on cookies and tracking technologies used on websites. To show you this page, we placed cookies on your computer. We use further cookies to maximise your shopping experience and checkout. If you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.