DirDirect :: Regulators & Hoses :: Single Tank Regulator Sets :: Scubapro MK17 EVO G260 Regulator

Scubapro MK17 EVO G260 Regulator

Scubapro MK17 EVO G260 Regulator
MK17 Evo 1st Stage DIN S260 2nd Stage

The Scubapro MK17 EVO G260 Regulator set is a popular setup for any diver. The Scubapro MK17 Evo first stage with G260 second stage is perfect for cold waters and allows for optimal hose routing in any configuration. Environmentally sealed for perfect protection.

SKU 12.172.030
DIN or A-Clamp?
£412.00 £485.00
save 15%

The Scubapro MK17 Evo G260 Regulator set is a popular setup for technical divers and cave explorers. The Scubapro MK17 Evo first stage with G260 second stage is perfect for cold waters and allows for optimal hose routing in any configuration. Environmentally sealed for perfect protection.

Set includes:
1 x Scubapro MK17 Evo first stage
1 x Scubapro G260 adjustable second stage
1 x Scubapro Regulator Hose

Scubapro G260 Second Stage:

The G260 is a new balanced adjustable second stage featuring metal components for excellent cold water resistance (inlet tube, orifice, inhalation control knob and hose connector). It's high performance makes it a choice for all demanding divers and it will be the natural choice for G250 fans.

Scubapro G260 Second StageNylon fiberglass design features SCUBAPRO's largest second stage casing and diaphragm for the ultimate in breathing sensitivity, regardless of position in the water.

Anodized aluminum front cover ring adds resistance without adding weight.

Metal components provide increased resistance to freezing when diving in extreme water conditions.

High-flow exhaust valve reduces exhalation for better overall breathing comfort.

Air-balanced valve smoothes out the inhalation effort when diving at varying depths and supply pressures.

A diver-adjustable inhalation effort knob fine-tunes air delivery to suit changing depths, water conditions and personal tastes.

Venturi-Initiated Vacuum Assist (VIVA) dive/pre-dive switch prevents free flows in cold water or when used as an octopus.

Reversible hose attachment allows you to easily adjust hose routing for tech diving configurations.

Super-flow hose features an oversized bore (larger inside hose diameter) that allows more air to flow on each inhalation.

Ultra-comfortable orthodontic mouthpiece is easy to grip yet doesn't inhibit airflow.

  • Weight: 275g.
  • Airflow at 200bar: 1800 l/min - 64 SCFM.
  • Maximum low pressure: 14bar.

Scubapro MK17 EVO First Stage:

Scubapro MK17 EVO RegulatorThe Scubapro MK17 EVO is Scubapro's premium high performance balanced diaphragm first stage.

Engineered specifically for cold water and harsh environments, its internal components are completely sealed off from the elements so neither water nor pollution can get inside the chrome-plated marine grade brass body to foul the mechanism.

Air balanced diaphragm delivers constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.

Environmentally sealed system prevents water and pollutants from fouling the inner mechanism.

More compact design features a smaller dry ambient pressure chamber and spring, although the bulletproof inner parts remain the same.

Dry ambient pressure chamber increases freezing resistance, ensuring consistent airflow in the coldest conditions.

  • Substantial increase in airflow -- 6900 l/min versus 6500 l/min -- includes improved balance of air supply pressure.
  • Two high pressure and four high-flow ports maximize air delivery and hose routing options.
  • High-flow performance is available from all four LP ports which are configured for optimum hose routing.
  • Weight: INT 232 - 850g.
  • Airflow at 200bar: 6900 l/ min - 230 SCFM.
  • Intermediate pressure (bar): 9.0-9.8.


*Most of our divers prefer DIN fitting on the 1st stage regulator which attaches to the tank valve. A DIN regulator has a threaded post which screws into the inside of a DIN valve tank and has no additional metal or braces that run behind the valve. This, together with the position of its o-ring, creates a more secure seal on the tank. YOKE (or A-Clamp) 1st stages have an oblong metal brace that completely encircles the tank valve when in place and is screwed down on the tank valve when the yoke screw is tightened. Both regulators seal to the scuba tank by means of an o-ring where the o-ring on a Yoke valve is in the tank valve itself as opposed to DIN regulators that have the own o-ring. DIN fittings are commonly accepted as being more secure but Yoke valves are common throughout North America and recreational tourist destinations. A DIN regulator can be adapted to Yoke valves by using an A-clamp adapter for travel.
Gift certificates

We use cookies to give you a better experience and understand how the site is used. By continuing to use this site, you consent to this policy. You can change your preferences any time. Click to learn more.