DirDirect :: Undersuits & Heating Systems :: Heating Systems :: Santi BZ400 Heated Undersuit

Santi BZ400 Heated Undersuit

Santi BZ400 Heated Undersuit
Santi Heated Undersuit Santi Heated Undersuit Santi Heated Undersuit

The Santi Heated BZ400 Undersuit is designed to protect the whole body from the cold in a comprehensive manner. The undersuit heats evenly the trunk, thighs and arms. The suit is designed to be worn on top of a thin base layer allowing most of the generated heat to be passed directly to the diver’s body.

Details
SKU 2024
Options
Size
Add Connector or Thermovalve
Add Santi 24Ah Battery
£483.00 £537.00
save 10%

Santi Heated BZ400 Undersuit is designed to protect the whole body of a diver from the cold in a comprehensive manner. The undersuit heats evenly the trunk, thighs and arms.

Santi BZ400 Heated SuitThe undersuit is designed to be worn on top of a thin base layer allowing most of the generated heat to be passed directly to the diver’s body.

The Heated SANTI undersuit gives you the best thermal protection under water. It keeps you warm and comfortable while heating even when the batteries are low or completely drained.

New generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking. Innovative, synthetic power cable resistant to high temperatures and cuts.

Works only with Santi Drysuit Connector or Thermovalve. Don’t combine with other connectors or batteries higher than 12V

  • Operating time on 24Ah battery: approx. 2h 30min - 3h
  • Made of BZ400 (420g/m2) Thinsulate™
  • Built in heating glove wires
  • Handy pocket on waist for power cord
  • P-valve hose opening
  • Net cuffs with rubber loops for thumbs
  • Elastic gussets under the armpits
  • Two side pockets
  • Elastic waist band
  • Two way entry zipper
  • Foot straps
  • Maximum heating temperature 45°C
  • Heating power: 110 W
  • Safety switch prevents from overheating
  • Wires covered with ultra-soft silicone resistant to breaking
  • Power cable resistant to high temperatures and cuts
  • Undersuit bag included
  • Mens stock sizes
  • Made to measure option for ladies and men

CHECK:  SANTI SIZE CHART
DOWN LOAD: MADE TO MEASURE FORM
DOWNLOAD: SANTI Sizer App


FREE "Made to Fit"
Very few divers require a totally made to measure suit due to the wide range of standard sizes available from manufacturers. With this in mind, Santi offers a free of charge Made-to-Fit service to any standard size suit ordered, sculpting standard suits to a divers' measurements. With your order, you can request up to 4 changes (ranging from 2 to 5 cm) to any of the standard size measurements listed under height, chest, inner arm, biceps, forearm, waist, hips, inner leg, thigh, calf or body trunk on the SANTI size chart.

 

 

Santi Connectors


SANTI DRYSUIT CONNECTOR

Santi Drysuit ConnectorSanti Drysuit Connector is used with your existing drysuit inflation valve.

Once your standard drysuit inflator valve is removed, the Santi Drysuit Connector is placed and secured in the drysuit valve hole. The cables run through the connector. The existing drysuit inflation valve is then screwed on top of the connector. Select Si-Tech or Apeks as the diameter will be different.

E/O cord connector passes through a standard suit inflation valve and provides power connection from the external battery to a heated product under the drysuit.

  • Available with Apeks or Si-Tech thread size
  • Unit hight 19mm + standard drysuit inflator
  • Total length of the cables including 55cm
  • Works with power supply no higher than 12V


SANTI THERMOVALVE

Santi ThermovalveThe Santi Thermovalve completely replaces your exsisting drysuit inflation valve.

Unlike the Santi Drysuit Connector, it offers two functions in one device: drysuit inflation valve with an integrated connector for Santi heating systems. Select Si-Tech or Apeks as the diameter will be different.

The 90° moveable valve head provides convenient hose attachment which allows for optimal E/O cord and pressure hose settlement under the drysuit.

  • Includes E/O Blind Plug
  • Available with Apeks or Si-Tech thread size
  • Unit hight 29mm
  • Total length of the cables 55cm
  • Works with power supply no higher than 12V


SANTI 24AH BATTERY

Santi 24Ah BatteryThe Santi 24Ah Battery was designed to provide enough power to operate full heated suits. The 24Ah Halcyon | SANTI battery pack is manufactured with hi-tech rechargeable Li-Ion cells which offer high discharge current. As a result, it may be used to supply power to equipment items which require 200W in total.

On the top section of the canister there are an E/O cord connector, piezo switch, overpressure valve. There is also a belt loop (no need for clamps) on the side of the housing.

The battery is designed to supply power to SANTI Heating Systems including undersuits, vests and gloves. However it may be also used with Halcyon Primary Diving Lights.

  • Height: 27cm / Diameter: 7.4cm / Weight: 1.8kg
  • E/O cord length: 35cm
  • Charging time: 14 hours
  • Operation depth: 100m
  • E/O cord connector with unique led illumination
  • Piezo switch
  • Belt loop (no need for clamps)
  • Operating voltage: 12V
  • Material: polyacetal, POM, Delrin
  • Charger included
Operating times:
  • Santi Heated Undersuit: 2hrs 30min - 3hrs
  • Santi Heated Vest: 5 - 6hrs
  • Santi Heated Gloves: 9 - 10hrs
  • Santi Undersuit + Gloves: 2hrs - 2hrs 15min
  • Santi Vest + Gloves: 3hrs 15min - 3hrs 45min


SANTI Heating Systems Explained

SANTI Heating Systems

 

: *
: *
: *
 
Gift certificates

 
We use cookies to give you a better experience and understand how the site is used. By continuing to use this site, you consent to this policy. You can change your preferences any time. Click to learn more.