Temporarily out of stock
Treat yourself to the revamped 2021 360 Observe Mirror with bungee strap. An innovative small convex mirror which can be hand and wrist mounted or mounted on a BCD/tool etc., allowing divers to see what’s happening behind them underwater. 360 Observe can be utilised to monitor buddies/groups as well as to conduct thorough self-bubble checks. Due to its convex reflective nature it can also emphasise light signalling.
Don’t get left behind! The Nautilus Marine Rescue GPS is a simple to use, low-profile, Personal Search & Rescue GPS Locator. At less than half the size of the original Nautilus radio it can be carried on every dive and is incredibly simple to use, like flipping a switch: Undo the latch and open, turn on, remove the antenna retainer, and press the red button. That’s it !
The Nautilus XM-L2U2 strobe was made with the technical deep water diver in mind and is very powerful with an irradiation distance of 200 metres. Boasting a 0-2500 lumens Cree XM-L2U2, the strobe is made out of aircraft grade hard anodised aluminium and is waterproof to 100m.
AP Valves lift bags are manufactured from heavy duty polyurethane coated nylon. All seams are high frequency welded for consistent and durable seals.
AP Valves lift bags are manufactured from heavy duty polyurethane coated nylon. All seams are high frequency welded for consistent and durable seals.
The self-sealing AP Diving SMB with a aluminium 0.1L cylinder mounted at the foot of the buoy just above the internal baffle. Deployment is simply a question of unfurling the SMB and cracking open the cylinder.
Much copied but never bettered. A real gem of a product, the 1.4m x 20cm wide orange sausage shaped SMB was developed in the early 1990s and quickly became a standard part of most divers’ kit.
The Apeks 1.4m SMB is a fully closed surface marker buoy which can only be inflated orally. Brass eyelets at the end of the SMB allow the diver to fold the unit and secure it into a floating loop using bolt snaps.
The Halcyon Super Big Slim SMB offers all the advantages of 1.8m long Super Big Diver's Alert Marker with a narrower profile. The SMB is fitted with Halcyon's No-Lock construction for LP hose connection.
Halcyon 80lbs (36.3kg) Lift Bag, closed circuit. Halcyon lift bags are still the industry standard for technical applications where precise control over lift and surface control are essential.
Halcyon Diver's Alert Marker 3.3 is a closed circuit 1m long SMB. The SMB is fitted with Halcyon's No-Lock (one-way valve) construction for LP hose connection.
Halcyon Big Diver's 4.5 Alert Marker is a closed circuit 1.4m long SMB in orange. The SMB is fitted with Halcyon's No-Lock (one-way valve) construction for LP hose connection.
Halcyon Super Big Diver's 6 Alert Marker is a closed circuit 1.8m long SMB in orange. The SMB is fitted with Halcyon's No-Lock (one-way valve) construction for LP hose connection.
Halcyon Orange Diver's Alert Marker 3.3 is 1m long SMB suitable for surface deployment only. The SMB is not fitted with a pressure relief valve.
The 125lbs Hollis Lift Bag is just what you need to raise or mark your larger sized items.
The Hollis 60 Lift Bag with over pressure relief valve with pull dump at the base is just what you need to raise or mark items.
The Hollis Compact 1m SMB can be inflated with a inflator hose or orally. It has a sturdy nylon strap loop with a stainless steel D-ring for attachment.
This Hollis SMB with a Sling Pouch can be used as a delayed or standard marker buoy. The 1.8m SMBcan be inflated by either using the oral inflator, the low pressure inflator hose connector or by using self sealing opening.
IST Air Nozzle - Attaches to standard QD fitting B.C.D. hose to inflate lifting bags and other equipment from air cylinder.
The OMS Lift Bags are made with heavy-duty nylon and webbing with durable construction. Comes with over pressure relief valve and lift handle on the top.
The OMS Lift Bags feature open bottom one way valve to prevent gas venting upon reaching the surface. The OMS 50lbs Lift Bag comes with over pressure relief valve and lift handle on the top.
Three-In-One Inflation. This OMS Hybrid SMB is designed with a self-sealing open bottom allowing a diver to inflate it using the second stage of a regulator, but also has a no-lock LP inflator to inflate it with a inflator hose which also permits oral inflation - covering all methods of inflation.
Three-In-One Inflation. The 1.8m long OMS Hybrid SMB is designed with a self-sealing open bottom allowing a diver to inflate it using the second stage of a regulator, but also has a no-lock LP inflator to inflate it with a inflator hose which also allows for oral inflation - covering all methods.
Can be connected to any low pressure inflator or dry suit hose via LP hose quick coupling. Bend the nose of the rubber body to get an easily-controlled LP jet of air. A mandatory accessory for any diver!
XDeep SMB's are made from a high quality orange nylon designed for signalling devices and life jackets, a SOLAS grade reflective strip is placed at the top to provide further visibility even in fading light.
XDeep SMB's are made from Nylon 240 dTEX, a high quality material made in the USA and specifically designed for use in maritime signalling equipment and life jackets.
The 90cm SMB is easier to use than longer buoys and takes up less space in your pocket. It's a great solution for lakes, quarries and other conditions where there are no significant waves.
