Regulator first stage Blanking Plug. Choice of 3/8" or 1/2" low pressure or a high pressure.
Apeks 90 Degree Fixed Elbow for regulator second stages. Fits most regulators.
Set of four Apeks Coloured Regulator Mouthpieces made from soft silicone. All the edges have been rounded ensuring it’s comfortable to wear even during extended dives. Includes red, yellow, blue and green mouthpiece.
Replacement Apeks Comfobite regulator mouthpiece in black comes with tie wrap.
Apeks Green Comfobite regulator mouthpieces are as comfortable as the black versions.
Apeks DIN conversion unit to remove A clamp from 1st stage and refit with male 300 bar DIN connector (M25). Available as an O2 clean version or non-O2 clean.
Add an additional fifth port to your Apeks DST with the Apeks DST 5th Port Turret Upgrade Kit. The picture shows a hose attached to the new port positioned at the turret end of the DST 1st stage.
The Apeks Long Hose Retainer is used to retain the long hose when diving in a long hose configuration without the need for a canister light.
Apeks Over Pressure Relief Valve for Drysuit Inflation Systems designed to be used on the first stage with a relief pressure of 12-17 bar, enhancing dive safety. The valve is a standard 3/8 UNF fitting for LP ports on contemporary first stages.
The Apeks Regulator Bag is a large padded regulator bag with enough space to hold your sidemount or twin set regulators and plenty of space for a single set-up.
Add an additional 5th port to your Apeks XTX200 and XTX100 first stages (FSR and FST type). A 5th port offers the user more versatility in terms of hose routings and port positions.
Want maximum protection for your regulator set up, maybe with long hose, dive computer, and other instruments? Don't skimp on protection, get the Atomic Regulator Bag.
Atomic Scuba Heat ensures your second stage regulator stays protected from freezing and free flow even in extremely cold conditions. Attach Scuba Heat to your regulator to heat up the cold air from your tank before you inhale.
Hex Multi-Tool made out stainless steel is small enought to fit in the palm. Wrench fittings: 13, 14, 15 and 17mm. Allen fittings: 4, 5, 6 and 8mm.
The stainless steel Best Divers Wrench Tool is the perfect accompaniment to any divers tool kit. Fits most of the major manufacturers hose fittings and has a lovely ergonomic feel to it. Five wrench fittings.
Plastic dust cap for DIN regulator first stages protecting the DIN fitting and threads against dust, splashes and damage. Has an internal o-ring and a string attached to prevent loss.
The hose hat is designed to simply press onto the knurled sleeve on the quick disconnect of the inflator hose. It provides a larger, easier to grip flange especially useful for drysuit connection. Emergency disconnect of the LP hose from dry suit inflator nipple, even with thick gloves, is now possible.
The compact 1.5-inch diameter ultra-lightweight dual-scale intermediate pressure gauge is perfect for helping diagnose problems in the field. Plugs into any standard BC low pressure inflator hose.
IST Intermediate Pressure Gauge with Bleeder Valve & BC Hose Connection.
IST Air Nozzle - Attaches to standard QD fitting B.C.D. hose to inflate lifting bags and other equipment from air cylinder.
Adjustable 1st stage over pressure valve. Pressure releases from 11.7 bar up.
The adjustment tool is designed to fine tune lever position and second stage gas flow, backed by a pressure gauge to determine intermediate pressure. With dual fittings, hex and slotted - interchangeable pressure gauge position and adjustable shaft length for maximum compatability.
The Pandora Lab’s Digital Interstage Pressure (IP) Gauge offers accuracy. Simply connect to low pressure inflator hose to check that the first stage pressure is correct.
With FREE Pouch worth £9.95. Pandora Multi Tool is a diver’s 'Swiss knife' designed to ease field maintenance, where and when it matters. It is as small as a credit-card but has all the functions of a multi-tool, with virtually every essential tool cut into its solid frame. Available in Stainless Steel or Titanium.
The Scubapro 120 Degree Elbow provides a fixed 120 degree angle bend for low pressure hose to the second stage, ideal for alternative hose routing that would affect the natural positioning of the second stage.
The Scubapro "blow gun" can be connected to any low pressure inflator or dry suit hose via LP hose quick coupling. Bend the nose of the rubber body to get an easily-controlled LP jet of air. An essential accessory for any diver.
Scubapro DIN/Int adapter is a lightweight travel adapter for divers who are used to diving with DIN systems.
With the trendy designed Scubapro Regulator Bag accompanied by the Computer Bag you can always be sure your regulator, gauges and dive computer are protected for your next dive outing.
Replacement Scubapro Mouthpiece is made out of purest medical silicone.
