OMS Thigh Pocket with velcro closure incorporates 2 elastic bands (wraps around thigh) and a 2" webbing that fastens to your waist band. Can also be used as a standard harness pocket if all straps are removed.
OMS Flip-up Wrist Slate with bungee for mounting, underwater pencil & coil, gauge strap and 3 surfaces to write on. Great quality.
The OMS Jon Line helps to maintain your position on a crowded shot line or anchor line during ascent. Comes complete with 2.4m webbing, pouch and stainless steel bolt snap.
OMS Harness Webbing Kit includes everything needed to build your own single loop harness.
The OMS SmartStream Harness Kit allows a continuous loop fixed "Hogarthian" harness to be converted to an adjustable one without adding any break points. By pulling the waist straps forward, the shoulder straps secure to the diver’s shoulders and back - allowing instant on-the-fly adjustment.
The OMS Underwater Notebook (Wetnotes) includes waterproof notebook and pencil. The cover has pockets, pencil holder and a clear window for tables.
The OMS backplate pad can be easily installed on the OMS backplates to create an additional layer of comfort. The pad also offers a unique accessory pocket accessed along the bottom of the pad that can be used for lift bag or SMB storage.
The new OMS Back Pad with intergrated Trim Pockets simply slips over the backplate without any screws. The four Trim Pockets can hold upto 1.5kg of weight each.
The OMS Cam Band with plastic buckle includes OMS Friction Pad. The 2" webbing is 36" in length.
The OMS Crotch Strap with two stainless steel d-rings and tri-glides is compatible with all backplates with 2" slot.
The OMS Friction Pad can be used with any 50mm wide camband straps to provide additional grip.
The OMS Sea Snips feature strong stainless steel blades with a sturdy plastic handle for durability. The Pouch has a secure velcro strap for closure and mounts onto any 2" webbing.
OMS Silicone Retraction Bands, for use with the OMS Deep Ocean, Trieste and Tesseract wings. Set includes 12 33cm bands made from durable elastomeric silicone rubber tubing and are easy to tie and easy to install on your air cell.
The OMS SmartStream Quick Adjust Assembly allows a continuous loop, one piece harness to be used as an adjustable one which will fit most harnesses and work with any 2 inch wide webbing. By pulling the waist straps forward, the shoulder straps secure to the diver’s shoulders and back - allowing proper adjustments to be instantly achieved.
OMS Spool with stainless steel double ender is availbale with 23m, 30m or 45m of line. OMS has eliminated the standard 1” central hole common to most spools and have replaced this with a unique concave opening on both sides of the spool.
OMS Harness Webbing Replacement with a centre grommet can be used as replacement for any single 2" loop harness.
The large OMS Trim Weight Pocket holds up to 2.5kg of weight. The pocket can be mounted either vertically or horizontally.
The small OMS Trim Weight Pocket holds up to 2kg of lead or shot weight. The pocket can be mounted by its vertical 2 inch webbing loop.
The OMS P-valve is designed to have the balance valve removed and replaced with a waterproof and pressure proof blank. This also allows the diver to clean and rebuild the valve when necessary but still keep the dry suit in service.
OMS Spring Straps are designed to fit Jetfin-style fins. These stainless steel spring heel straps come complete with pins.
The OMS Performance Double Wing for twinset diving is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other and is designed specifically for use with double tanks. Available in many colours with a 45lbs lift capacity.
The OMS Performance Mono Wing for single cylinder diving is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. Now available in many colours.
The OMS Aluminum Backplate is made by a superior de-burring process which helps elimate sharp edges. The backplate is extremely lightweight making it a perfect accessory to travel with.
The OMS Harness Pocket is a robust, expandable pocket with a low profile. It offers three separate storage areas: main large compartment, a slimmer slate pocket and a smaller outside zip pocket.
The OMS Stainless Steel Backplate is coined and polished so you will never have to worry about sharp edges or wear from the plate. Multiple mounting, waistband and accessory holes.
The OMS Utility Pocket is made to slip on the waist webbing of any 2" harness. It's two sections with YKK zippers give divers a large storage area.
The OMS backplate with SmartStream harness can be quickly adjusted by pulling the waist straps forward, the shoulder straps secure to the diver’s shoulders and back - allowing proper adjustments instantly.
The OMS Performance Double Wing with SmartStream Harness allows on-the-fly adjustment. By pulling the waist straps, the shoulder straps secure to the diver’s shoulders and back - allowing instant adjustments. Use the harness in its adjustable configuration or simply as a standard DIR fixed harness.
The OMS Lift Bags are made with heavy-duty nylon and webbing with durable construction. Comes with over pressure relief valve and lift handle on the top.
The OMS 52mm SPG is compact but clear 360 bar pressure gauge for any application. Comes complete with a swivel pin.
The OMS 63mm SPG with with a tempered glass and nickel finishing is an ideal 360 bar main pressure gauge. Swivel pin included.
The low profile OMS Mini 400 bar SPG is ideal for stage and sidemount rigs. Comes complete swivel pin.
The OMS SmartStream Signature System features a quick-adjust harness developed to alleviate adjustment challenges which may arise while donning a heavy rig. By pulling the waist straps forward, the shoulder straps secure to the diver’s shoulders and back - allowing proper adjustments to be instantly achieved.
The system is delivered fully assembled with wing, backplate with adjustable harness, backplate pad with intercrated trim pockets and weight pockets.
The OMS O-Ring Kit contains 16 most common types of different o-rings from HP swivel to tank neck o-rings. Two o-ring picks included.
Three-In-One Inflation. This OMS Hybrid SMB is designed with a self-sealing open bottom allowing a diver to inflate it using the second stage of a regulator, but also has a no-lock LP inflator to inflate it with a inflator hose which also permits oral inflation - covering all methods of inflation.
Three-In-One Inflation. The 1.8m long OMS Hybrid SMB is designed with a self-sealing open bottom allowing a diver to inflate it using the second stage of a regulator, but also has a no-lock LP inflator to inflate it with a inflator hose which also allows for oral inflation - covering all methods.
The OMS Tattoo Mask with UV protection is fitted with Ultraviolet protected lens. Underwater the ultraviolet lenses make the colours more vibrant. OMS Tattoo Masks are framess and ultra low volume.
OMS Single Tank Adapter with stainless steel plate, two cylinder straps, non-slip friction pads, plastic buckles, bolts and wing nuts.
The stainless steel OMS Single Tank Adapter Plate without cambands.