300bar DIN Decanting Hose without gauge for cylinders. Each side has a 300 bar DIN fitting with one end having the spring-operated purge button. Ideal to decant contents of one cylinder to another.
300bar DIN Decanting whip with gauge. The hose comes with two 300 bar ends and a 400 bar pressure gauge on one side with a spring-based purge button on the other side.
The Apeks Cylinder Pressure Tester comes with push button vent. DIN fitting. A 360bar HP gauge that can be fitted to a cylinder to check the pressure.
Test the pressure of your tanks before heading off for a dive site. High quality DIN fitting pressure testing gauge with release valve to gauge tank content pressure.
Halcyon Stage Rigging Kit provides a simple but elegant solution for stage/deco bottles. The kit includes everything you need to configure your single cylinder for technical or overhead diving. Available in kits for 40cf, 80cf and 7L aluminium cylinders.
Keep regulator hoses lying flat and avoid kinking. Silicone strips on the inside of the band grip the tank and keep the Dive Rite Deluxe Hose Retainer from rolling.
Dive Rite Hose Retainer is ideal for stage bottles, bailouts or sidemount configurations. This is Dive Rite's superior alternative for keeping those hoses under control.
Replacement 1" Rubber band for aluminum 7L and 80cf or 40cf stage bottles
Octogrip Super Cam buckle system securely holds the 14cf bottle to your single or double tank rig by attaching to a tank.
Halcyon Mounting Straps for 6cf and 1L drysuit inflation bottle. The mounting straps allow divers to secure a smaller inflation bottle directly to their backplate.
Pair of replacement stainless steel bolt kit with delrin thumbwheels for twinning bands. Available in three sizes.
Set of two mounting straps for drysuit inflation cylinders. Available in two sizes to fit cylinder diameters 90mm or 115mm or less.
High quality stainless steel BTS twinning bands for Euro cylinders. Comes complete with stainless steel bolt kit. These bands are continuous welded (not spot welded) and are rigid, adding to their quality and robustness.
The Delrin Thumbwheels are designed as an option instead of the traditional metal wing nuts. The unique 3 point system gives you better grip when handling with gloves or in cold water. Metric.
Plastic dust cap for DIN cylinder valves. The dust cap comes with a "curly" string and has an o-rin inside of it.
Dir Zone Stage Rigging Kit for 80cf, 40cf and 7L aluminium cylinders.
Dive Rite's 1.5" wide and 36" long low profile cam strap is light weight, low profile and comes with a non-slip pad to protect tanks from scratches. The marine-grade, stainless steel buckle is also strong, yet lightweight.
GUE Argon Do Not Breathe Sticker. Black print on reflective backgound. Size 15.5cm x 8cm.
Mark the contents of your tanks with these handy stickers on a roll. Perforated for ease of use. Contains spaces to mark your initials, date, contents. Includes over 500 stickers per roll.
Metric GUE MOD decals for standard gases. Three-inch black letters on a reflective background ensure high visibility.
One metre of protective cover for jubilee clamps to avoid scratching of cylinders and damage to other equipment by sharp edges of the jubilee bands.
Self adhesive 8cm high letters & numbers ideal for marking cylinders. For diver initials and/or standard gas switch depths. After selecting a letter "continue shopping" to add more until you have exactly what you want.
Green warning sticker that should be displayed in all vehicles carry diving cylinders. Adhesive glue hold sticker to inside of rear screen. Size: 10 x 10 cm.
The Halcyon V-Weight Pouch is specifically designed for twinsets with wider gaps between the two cylinders (i.e. some twin 8.5L and 7L sets). Using the pouch you can easily add weight to your twinset. The middle section is for v-weights whilst the lower section allows for tail weight.
The OMS Friction Pad can be used with any 50mm wide camband straps to provide additional grip.
Set of three 1kg coated V-weights for those who want to have the freedom to add and subtract integrated twinset weights for varying conditions. (Shipped within UK mainland only. Contact us for other delivery options.)
Coated 1kg or 2kg tail weight with stainless steel bar. (This item is only shipped within UK mainland. Contact us for other delivery options.)
