A complete suit inflation unit including 1L Steel Cylinder, BtS Mounting Straps and 1st Stage with pre-adjusted Over Pressure Relief Valve. Popularly used with air but can also be used with argon.
A complete suit inflation unit including 6cf (0.85L) Aluminium Cylinder, BtS Mounting Straps and 1st Stage with pre-adjusted Over Pressure Relief Valve. Popularly used with air but can also be used with argon.
1L Steel Suit Inflation and/or Argon Cylinder - 200bar. Popularly used with air but can also be used with argon.
Aluminium 0.85L suit inflation and/or argon cylinder. 200bar. Popularly used with air but can also be used with argon.
1.5L brushed aluminium suit inflation cylinder 200bar. Ideal size for CCR divers, longer decompression dives or multiple dives.
Octogrip Super Cam buckle system securely holds the 14cf bottle to your single or double tank rig by attaching to a tank.
Halcyon Mounting Straps for 6cf and 1L drysuit inflation bottle. The mounting straps allow divers to secure a smaller inflation bottle directly to their backplate.
Set of two mounting straps for drysuit inflation cylinders. Available in two sizes to fit cylinder diameters 90mm or 115mm or less.
Apeks Over Pressure Relief Valve for Drysuit Inflation Systems designed to be used on the first stage with a relief pressure of 12-17 bar, enhancing dive safety. The valve is a standard 3/8 UNF fitting for LP ports on contemporary first stages.
Adjustable 1st stage over pressure valve. Pressure releases from 11.7 bar up.
GUE Argon Do Not Breathe Sticker. Black print on reflective backgound. Size 15.5cm x 8cm.
The hose hat is designed to simply press onto the knurled sleeve on the quick disconnect of the inflator hose. It provides a larger, easier to grip flange especially useful for drysuit connection. Emergency disconnect of the LP hose from dry suit inflator nipple, even with thick gloves, is now possible.
300bar DIN Decanting Hose without gauge for cylinders. Each side has a 300 bar DIN fitting with one end having the spring-operated purge button. Ideal to decant contents of one cylinder to another.
300bar DIN Decanting whip with gauge. The hose comes with two 300 bar ends and a 400 bar pressure gauge on one side with a spring-based purge button on the other side.
The Apeks Cylinder Pressure Tester comes with push button vent. DIN fitting. A 360bar HP gauge that can be fitted to a cylinder to check the pressure.
DIN fitting pressure testing gauge with release valve to gauge tank content pressure. Gauge shows content up to 400 bar (5800 psi) with standard 300 bar DIN fitting. Can also be used with optional A-Clamp/Yoke adapter. High quality but light.
Plastic dust cap for DIN cylinder valves. The dust cap comes with a "curly" string and has an o-rin inside of it.
