The Apeks Cylinder Pressure Tester comes with push button vent. DIN fitting. A 450bar HP gauge that can be fitted to a cylinder to check the pressure.
DIN fitting pressure testing gauge with release valve to gauge tank content pressure. Gauge shows content up to 400 bar (5800 psi) with standard 300 bar DIN fitting.
Dir Zone Stage Rigging Kit for aluminum cylinders available for sizes 80cf, 40cf and 7lt.
This simple but elegant solution provides a reliable and streamlined solution for stage/deco bottles. The Halcyon stage kit includes everything you need to configure your single cylinder for technical or overhead diving. They are available in kits for 40 and 80cft and 7 liter cylinders.
Keep regulator hoses lying flat and avoid kinking. Silicone strips on the inside of the band grip the tank and keep the Deluxe Hose Retainer from rolling.
Hose retainer for 80cf ali cylinders. Ideal for OC stage bottles, bailouts or sidemount configurations. This is Dive Rite's superior alternative for keeping those hoses under control.
Replacement 1" Rubber band for aluminum 7L and 80cf or 40cf stage bottles
Set of two mounting straps for drysuit inflation cylinders. Available in two sizes to fit cylinder diameters 90mm or 115mm or less.
Mounting straps for securing a larger suit inflation cylinder to a divers primary cylinder or twinset.
Mounting straps for securing a 0.85lt (or similar size) inflation cylinder to the backplate. Comes with bolts.
Mounting straps for 6cf and 14cf drysuit inflation bottle. Octogrip Super Cam buckle system securely holds the 14cf bottle to your single or double tank rig by attaching to a tank. Smaller 6cf bottle mounting straps allows divers to secure a smaller inflation bottle directly to their backplate.
The Delrin Thumbwheels are designed as an option instead of the traditional metal wing nuts. The unique 3 point system gives you better grip when handling with gloves or in cold water.
Dive Rite's 1.5 inch (3.8 cm) wide and 36" long low profile cam strap is light weight, low profile and comes with a non-slip pad to protect tanks from scratches. The marine-grade, stainless steel buckle is also strong, yet lightweight.
Mark the contents of your tanks with these handy stickers on a roll. Perforated for ease of use. Contains spaces to mark your initials, date, contents. Includes over 500 stickers per roll.
Metric GUE MOD decals for standard gases. Three-inch black letters on a reflective background ensure high visibility.
One metre of protective cover for jubilee clamps to avoid scratching of cylinders and damage to other equipment by sharp edges of the jubilee bands.
Self adhesive letters ideal for marking cylinders. For diver initials and/or standard gas switch depths. Letter height: 8cm. Black. Long lasting. After selecting a letter "continue shopping" to add more until you have exactly what you want.
Green warning sticker that should be displayed in all vehicles carry diving cylinders. Adhesive glue hold sticker to inside of rear screen. Size: 10 x 10 cm.
DIN Adaptor Insert to 232 bar DIN cylinder valves to a A-Clamp / Yoke fitting. The insert screws into your M25 valve with the appropriate allen key. Size of allen key required may vary.
Now you can easily add weight to your doubles kit in the convenient void between your tanks. The Halcyon V-Weight Pouch is specifically designed for twins with wider cap. It attaches via grommets on 2 inch webbing and can hold up to 10lbs of soft weight in its two Velcro-closure pockets.
The OMS O-Ring Kit contains 16 most common types of different o-rings from HP swivel to tank neck o-rings. Two o-ring picks included.
Set of (3) three x 1kg Coated V-weights for those who want to have the freedom to add and subtract integrated twinset weights for varying conditions. Colour: Black.
Due to weight, item not available for outside mainland UK.
Coated 1kg or 2kg tail weight with stainless steel bar.
Due to the weight these items only ships within UK mainland.