;
DirDirect :: Cylinders & Accessories :: Suit Inflation Systems :: 1.5L Suit Inflation/Argon Cylinder - Aluminium

1.5L Suit Inflation/Argon Cylinder - Aluminium

1.5L Suit Inflation/Argon Cylinder - Aluminium
1.5L Suit Inflation Cylinder

1.5L brushed aluminium suit inflation and/or argon Cylinder 200bar. Popularly used with air as an alternative suit inflation method and sometimes with argon. Ideal size for CCR divers, longer decompression dives, multiple dives.

Details
SKU DT2001
£122.00

1.5L Luxfer Cylinder1.5L brushed aluminium suit inflation and/or argon Cylinder 200bar. Popularly used with air as an alternative suit inflation method and sometimes with argon.

Ideal size for CCR divers, longer decompression dives, multiple dives.

  • Valve: M25 (manufacturer BtS)
  • Cylinder make: Luxfer
  • Working pressure: 200 bar
  • Weight (empty): 2.05-2.08 kg  
  • Buoyancy (empty): +0.31kg
  • Cylinder dimensions: height 29.5cm; diameter 10cm

IMPORTANT NOTE FOR DELIVERIES OUTSIDE OF UK MAINLAND:
Due to aviation regulations the cylinder and valve will be shipped disasembled. It will be the customers responsibility to have the cylinder and valve re-assembled

Important Notice:
Cylinders that may during normal use lose all gas pressure above ambient when under water, such as side-mount, bail-out, marker buoy, buoyancy compensator and suit inflation cylinders are at a greater risk of water ingress and internal corrosion when empty.  If fresh water is present in a cylinder this can mean the loss of more than 2 mm of the thickness of the cylinder wall within 6 months. This is increased to more than 5 mm in the presence of salt water. (Diving cylinder walls are generally between 2 and 5 mm thick). While testing of diving cylinder remains at 2.5 years for an internal visual amd 5 years for full hydrostatic test in the UK, a more frequent visual inspection by a certified test centre for suit inflation cylinders is recommended).

Recommended practice includes:

  • Never allowing suit inflation cylinder to fully empty underwater
  • Storing cylinders with at least 2 bar of pressure in them
  • Keeping/transporting any empty cylinder with valve closed
  • Drying and capping valves when regulator is not attached
  • Periodic check against moisture/water buildup in cylinder

 

 

: *
: *
: *
Type the characters you see in the picture:

test

*
Bolt Snap 3/8
£7.00
Gift certificates

 
We use cookies to give you a better experience and understand how the site is used. By continuing to use this site, you consent to this policy. You can change your preferences any time. Click to learn more.