This combination is ideal for divers who want to run the vest off a separate battery. It includes the SP vest, Light For Me canister, e/o cord and connections, NiMH battery and charger.
SP HEATED VEST
Uniquely designed to complement the lighting systems with underwater pluggable E/O cords, the system helps divers remain comfortable with extended run-times and extreme cold.
• Works with E/O connector on existing canister torch or off a separate battery
• Burn times range from 60 to 270 depending on battery & torch combination
• Power consumption: 38w
Divers can experience massive variation between the heat that can be generated during kitting up and waiting around on the surface and the chilly temperature endured at depth, finished off by long decompression stops where typically the lack of physical activity will draw the core temperature even lower. Uniquely, our heated vest covers the lower back, providing heat to the vital kidney area.
The Heated Vest System has been designed to effectively apply heat during the decompression stage of your dive utilising you primary light battery by swapping over the underwater pluggable (E/O) cord. The vest is designed to work safely even when your drysuit floods and at a gentle 36w minimises the risk of burning the diver or aggravating the risk of bends through excessive capillary dilation.
The Heated Vest System can be installed in minutes and can be moved between suits or even completely removed during summer months or when the dives do not require the additional heat. This functionality is achieved with an innovative combination switch which replaces your standard dry-suit inflator and routes both power and air through the one inlet as well as incorporating a rotating on / off switch.
There is thus no need to make an additional hole in your drysuit for the power supply. The switch also incorporates a relay to prevent over discharging your battery by cutting off the power supply just below 10V.
LIGHT FOR ME BATTERY & CANISTER
- anodised aluminium housing
- battery 12V 10Ah
- fitted with E/O connector
- a rotary magnetic switch in the upper lid that allows to switch it on and off underwater
- pressure valve in the bottom
- does not require opening for charging, as it is charged through the E/O connector (included)
- can supply power to a compatible torch head of any brand using the E/O system in the range of 12 - 14.4 voltage
- can also be used to power the underwater heating vest
- assembled to hip belt with band clips and cordura cover
OPTIONAL LIGHT FOR ME 4TEC LIGHT HEAD WITH E/O
- 4TEC E/O head - a new model of a well-known torch, sold as a separate head
- Can be powered by battery made by any company using the E/O system in the range of 10 - 20 voltage.
Optics:
- 4 CREE XRE LEDs bin R2 8300K
- 1200 lumens altogether
- narrow beam angle
Electronics:
- Two modes of light: 100% and 30%
Housing:
- made from anodised construction aluminium
Head:
- max diameter: 69mm
- min diameter: 56mm
- length: 70mm
Goodman handle:
- width: 105mm
- min height: 20mm, max height: 75mm